As listed
| Field | Value |
|---|---|
| Seller | LAS Aerospace |
| Seller's item # | I00QVAXXX |
| Angle | 100° |
| Body | 1/2" |
| Flutes | 3 |
| Material | High-speed steel |
| Thread | 1/4"-28 |
| Pilot | Integral (fixed) |
| Listing checked | 2026-09-30 |
Taken from LAS Aerospace's product page on 2026-09-30. Where the listing does not state a figure, this table does not either.
What it is for
The listing pairs each pilot with its fastener, and the rivet pairs agree with our drill chart: #40 for 3/32", #21 for 5/32".
They go in a microstop; for confined spots, the extended microstop takes 3/8" cutters instead.
Sizes listed
| Part | Pilot | Use |
|---|---|---|
| 1000-100-12 | #12 | #10 AN Screw |
| 1000-100-19 | #19 | #8 AN Screw |
| 1000-100-21 | #21 | 5/32" rivet |
| 1000-100-28 | #28 | #6 AN Screw |
| 1000-100-30 | #30 | 1/8" rivet |
| 1000-100-33 | #33 | #4 AN Screw |
| 1000-100-40 | #40 | 3/32" rivet |
As listed by LAS Aerospace on 2026-09-30. Check the live listing before ordering: stock and part numbers change.
Where to buy
The link opens LAS Aerospace's own page for this item, so the price and stock you see are theirs and current. We do not copy prices.
The Aviation Point links to third-party manufacturer and distributor websites. We may earn a commission on purchases made through these links, at no additional cost to you. The Aviation Point has no partnership or affiliate agreement with LAS Aerospace, and these links carry no tracking parameters.
Sources
- LAS Aerospace — Pilot Cutter — product listing, item I00QVAXXX, checked 2026-09-30.