Sheet metal tooling
Tools at a working aviation distributor in your region. Our product pages carry the specs; the other rows open the seller's category pages with current stock. Prices are never copied. Each group also points at the reference page that tells you which one to buy.
Yardstore Wichita, Kansas, USA yardstore.com Seller profile and 76 product pages →
- Cleco Pliers with GripSpecs & where to buy
- Spring Cleco 1/8", K SeriesSpecs & where to buy
- Pneumatic Spring Cleco ToolSpecs & where to buy
- Side-Grip Cleco Clamp, 3/4" x 1"Specs & where to buy
- Side Clamp Kit, 13 PieceSpecs & where to buy
- Spring clecos, all sizesView at Yardstore
- Wing-nut draw clecosView at Yardstore
- Hex-nut draw clecosView at Yardstore
- Cylindrical clecosView at Yardstore
Rivet guns
Rivet gun guide →- ACAT 2X Rivet GunSpecs & where to buy
- ACAT 3X Rivet GunSpecs & where to buy
- ACAT 4X Rivet GunSpecs & where to buy
- ACAT Corner Rivet GunSpecs & where to buy
- ACAT 5X Rivet GunSpecs & where to buy
- ACAT 7X Rivet GunSpecs & where to buy
- ACAT 9X Rivet GunSpecs & where to buy
- Rivet guns, 2X to 9X, .401 and .498 shankView at Yardstore
- Rivet gun kitsView at Yardstore
Rivet sets
Rivet head markings →- Gooseneck Rivet Set, 4 PieceSpecs & where to buy
- Double Offset Rivet Set, 4 PieceSpecs & where to buy
- Standard Flush Rivet Set, 1" FaceSpecs & where to buy
- Rivet Set 1/8", Straight, 3 1/2"Specs & where to buy
- Straight Rivet Set, 4 Piece, 3 1/2"Specs & where to buy
- Straight and 10° Offset Rivet Set, 8 PieceSpecs & where to buy
- Rivet Set 3/32", 10° Offset, 3 1/2"Specs & where to buy
- Offset Flush Set, 1" x 3 1/2", 10°Specs & where to buy
- Swivel Flush Set, 3/4"Specs & where to buy
- Flush Set with Polyurethane Ring, 1"Specs & where to buy
- All goose neck rivet setsView at Yardstore
- All double offset rivet setsView at Yardstore
- All flush rivet setsView at Yardstore
Bucking bars
Bucking bar guide →- Tungsten Bucking Bar, 1.07 lbSpecs & where to buy
- Steel Bucking Bar, 0.9 lb (634)Specs & where to buy
- Steel Bucking Bar, 1.4 lbSpecs & where to buy
- Steel Bucking Bar, 2.36 lb (690)Specs & where to buy
- Bucking Bar Set, 4 Piece (ABCD)Specs & where to buy
- Tungsten Bucking Bar, 0.75" x 1.06" x 8", 2.4 lbSpecs & where to buy
Squeezers and dimpling
Rivet squeezer guide →- Texas Hand Squeeze, 3" YokeSpecs & where to buy
- Pneumatic Alligator Squeeze, 3" YokeSpecs & where to buy
- Dimple Die Set, 3/32" (100°)Specs & where to buy
- Squeeze Set, 11 PieceSpecs & where to buy
- Economy Hand Squeeze, 3" YokeSpecs & where to buy
- Dimple Die Set, 1/8" (100°)Specs & where to buy
- Longeron Yoke for Pneumatic C SqueezeSpecs & where to buy
- Texas Hand Squeeze Yoke, 4"Specs & where to buy
Blind rivet and rivnut tools
Edge distance calculator →Rivet shavers
AN470 head dimensions →Angle drills
Drill size per rivet →Drill bits
Drill size per rivet →Hole finders, drill stops and lubricant
Drill size per rivet →Countersinking
Countersink cage guide →Deburring
Deburring guide →- Texas In/Out Deburr Tool Kit, 5 PieceSpecs & where to buy
- Texas In/Out Deburr Tool, 1/8"Specs & where to buy
- Noga Deburring Tool, 10 BladesSpecs & where to buy
- Edge Deburr Tool with Safety GuardSpecs & where to buy
- Rosebud Deburr Bit #1, 100°Specs & where to buy
- Chip Chaser Set, 2 1/2" and 5 1/2"Specs & where to buy
- Deburring tools and setsView at Yardstore
Nut plate and Hi-Lok tools
Snips and shears
Minimum bend radius →Sealant guns
Safety wire
Tool kits
Tool kit contents compared →The product pages are ours: specs as Yardstore lists them, checked 29 September 2026. The other rows open live category pages on yardstore.com. The Aviation Point is not affiliated with Yardstore: no partnership or affiliate agreement exists yet, and the links carry no tracking parameters.
LAS Aerospace Okehampton, Devon, UK lasaero.com Seller profile and 36 product pages →
- Cleco Kit, 100 Clecos and PliersSpecs & where to buy
- Cleco Pliers, Standard and Heavy DutySpecs & where to buy
- Spring tension clamps (clecos)View at LAS Aerospace
- Wing nut fasteners (clecos)View at LAS Aerospace
- Hex nut fasteners (clecos)View at LAS Aerospace
- Cleco tools, installation and removalView at LAS Aerospace
Rivet guns
Rivet gun guide →Rivet sets and dimple dies
Rivet head markings →Bucking bars
Bucking bar guide →Squeezers
Rivet squeezer guide →Drill bits
Drill size per rivet →Countersinking
Countersink cage guide →Deburring
Deburring guide →Sealant guns
The product pages are ours: specs and size tables as LAS lists them, checked 30 September 2026. The other rows open live pages on lasaero.com. The Aviation Point is not affiliated with LAS Aerospace: no partnership or affiliate agreement exists yet.
Sheet, tube, rivets, hardware and sealants
The consumables a repair uses: aluminum and steel sheet and tube, solid and blind rivets, AN bolts and nuts, fuel tank sealants, corrosion control and locking wire. Aircraft Spruce in the US, LAS Aerospace in Europe and the UK. Each product page carries the size table with its part numbers, as the seller lists it. The region switch above applies here too.
Aircraft Spruce Corona, California, USA aircraftspruce.com Seller profile and 65 product pages →
Aluminum sheet
2024-T3 aluminum spec →- 2024-T3 Aluminum Sheet (Alclad and Bare)Specs & where to buy
- 2024-O Alclad Aluminum Sheet (Annealed)Specs & where to buy
- 6061-T6 Bare Aluminum SheetSpecs & where to buy
- 7075-T6 Alclad Aluminum SheetSpecs & where to buy
- 5052-H32 Aluminum Sheet (Fuel Tanks)Specs & where to buy
- 3003-H14 Soft Aluminum SheetSpecs & where to buy
Angle, bar, tube, stringer and hinge
Rivet spacing calculator →4130 and stainless steel
Minimum bend radius →Solid rivets
AN470 rivet spec →Blind rivets and rivet nuts
Edge distance calculator →- CherryMAX CR3212 Countersunk Blind RivetsSpecs & where to buy
- Open-End Pull Rivets (Aluminum, Steel, Stainless)Specs & where to buy
- Avex Non-Structural Blind RivetsSpecs & where to buy
- Rivet Nuts, Flat Head (NAS1329)Specs & where to buy
- CherryMAX CR3213 Universal Head Blind RivetsSpecs & where to buy
- CherryMAX CR3242 Countersunk, 1/64" OversizeSpecs & where to buy
- CherryMAX CR3243 Universal Head, 1/64" OversizeSpecs & where to buy
Nut plates (anchor nuts)
Drill size per rivet →- K1000 Two-Lug Anchor Nuts (MS21047)Specs & where to buy
- MK1000 Miniature Two-Lug Anchor Nuts (MS21069)Specs & where to buy
- One-Lug Anchor Nuts (K2000, MS21051, MS21080)Specs & where to buy
- Floating Anchor Nuts MS21059 and MS21061Specs & where to buy
- MF5000 Miniature Two-Lug Anchor NutsSpecs & where to buy
- Elastic-Insert Two-Lug Anchor Nuts (AN366F, MS21078)Specs & where to buy
- Dimpled Anchor Nuts K1100 and MS21053Specs & where to buy
- Tinnerman Anchor Nuts (NAS444)Specs & where to buy
- G902-15 Pneumatic Nut Plate RiveterSpecs & where to buy
Bolts, nuts, washers and pins
- AN3 Bolts (10-32): Length and Grip by Dash NumberSpecs & where to buy
- AN4 Bolts (1/4-28): Length and Grip by Dash NumberSpecs & where to buy
- MS21042 All-Metal Stop NutsSpecs & where to buy
- AN365 Elastic Stop Nuts (Fiber Insert)Specs & where to buy
- AN310 Castle NutsSpecs & where to buy
- AN970 Large-Area Flat WashersSpecs & where to buy
- MS24665 Cotter Pin Assortment (100)Specs & where to buy
AN fittings
- AN818 Coupling Nut (B-Nut)Specs & where to buy
- AN819 Coupling SleeveSpecs & where to buy
- AN816 Nipple, Flared Tube to Pipe ThreadSpecs & where to buy
- AN821 90° Elbow, Flared TubeSpecs & where to buy
- AN822 90° Elbow, Flared Tube to Pipe ThreadSpecs & where to buy
- AN823 45° Elbow, Flared Tube to Pipe ThreadSpecs & where to buy
- AN824 Tee, Flared TubeSpecs & where to buy
- AN825 Tee, Flared Tube with Pipe Thread on SideSpecs & where to buy
- AN833 90° Bulkhead Elbow, Flared TubeSpecs & where to buy
- AN837 45° Bulkhead Elbow, Flared TubeSpecs & where to buy
- AN814 Plug and BleederSpecs & where to buy
Safety wire
Fuel tank sealants
Corrosion control and conversion coating
- ACF-50 Corrosion Inhibiting CompoundSpecs & where to buy
- CorrosionX Aviation (MIL-PRF-81309H)Specs & where to buy
- Boeshield T-9 Corrosion ProtectantSpecs & where to buy
- Alodine 1201 (Bonderite M-CR 1201 Aero)Specs & where to buy
- Alodine 1001 (Bonderite M-CR 1001 Aero)Specs & where to buy
- Alumiprep 33 (Bonderite C-IC 33 Aero)Specs & where to buy
The product pages are ours: size tables as Aircraft Spruce lists them, checked 30 September 2026. The Aviation Point is not affiliated with Aircraft Spruce: no partnership or affiliate agreement exists yet.
LAS Aerospace Okehampton, Devon, UK lasaero.com Seller profile and 36 product pages →
Sheet and extrusions
2024-T3 aluminum spec →Solid rivets
AN470 rivet spec →Blind rivets
Edge distance calculator →Sealants
Primers and corrosion control
Locking wire
The product pages are ours: specs and size tables as LAS lists them, checked 30 September 2026. The other rows open live pages on lasaero.com. The Aviation Point is not affiliated with LAS Aerospace: no partnership or affiliate agreement exists yet.