As listed
| Field | Value |
|---|---|
| Seller | LAS Aerospace |
| Seller's item # | E01X1IAJ9 |
| Use | Front, back or both sides of a hole in one pass |
| Drive | Any drill |
| Adjustment | Set screw in the shank sets depth of cut |
| Listing checked | 2026-09-30 |
Taken from LAS Aerospace's product page on 2026-09-30. Where the listing does not state a figure, this table does not either.
What it is for
One tool per hole size, from 3/32" to 1/4", matching the rivet sizes on the drill chart.
The hand-held equivalent in the US is the Texas in/out deburr kit.
Sizes listed
| Part | Holes |
|---|---|
| TD001 | 3/32" |
| TD002 | 1/8" |
| TD003 | 5/32" |
| TD004 | 3/16" |
| TD005 | 1/4" |
As listed by LAS Aerospace on 2026-09-30. Check the live listing before ordering: stock and part numbers change.
Where to buy
The link opens LAS Aerospace's own page for this item, so the price and stock you see are theirs and current. We do not copy prices.
The Aviation Point links to third-party manufacturer and distributor websites. We may earn a commission on purchases made through these links, at no additional cost to you. The Aviation Point has no partnership or affiliate agreement with LAS Aerospace, and these links carry no tracking parameters.
Sources
- LAS Aerospace — Two-Way Deburring Tool — product listing, item E01X1IAJ9, checked 2026-09-30.