CherryMAX Blind Rivets

The bulbed, mechanically locked structural blind rivet, with the grip range of each part number as LAS lists it.

As listed

FieldValue
SellerLAS Aerospace
Seller's item #Y03318FZV
TypeBulbed, lock-spindle structural blind rivet
Diameters1/8" to 1/4"; nominal (NAS1400) and 1/64" oversize (NAS1740)
AnvilEach rivet supplied with its own installation anvil
ToolingOne pulling head covers several diameters
Listing checked2026-09-30

Taken from LAS Aerospace's product page on 2026-09-30. Where the listing does not state a figure, this table does not either.

What it is for

Choose by grip, not length: the table gives the minimum and maximum material thickness each part number is made for. Measure the stack and pick the range it falls in.

The US-side puller for these is the Gage Bilt GB704.

Sizes listed

PartDiameterGrip minGrip max
Countersunk Head
CR3212-4-21/8"0.063"0.125"
CR3212-4-31/8"0.126"0.187"
CR3212-4-41/8"0.188"0.250"
CR3212-4-51/8"0.251"0.312"
CR3212-4-61/8"0.313"0.375"
CR3212-4-71/8"0.376"0.437"
CR3212-4-81/8"0.438"0.500"
CR3212-4-91/8"0.501"0.562"
CR3212-5-25/32"0.065"0.125"
CR3212-5-35/32"0.126"0.187"
CR3212-5-45/32"0.188"0.250"
CR3212-5-55/32"0.251"0.312"
CR3212-5-65/32"0.313"0.375"
CR3212-5-75/32"0.376"0.437"
CR3212-5-85/32"0.438"0.500"
CR3212-5-95/32"0.501"0.562"
CR3212-5-105/32"0.563"0.625"
CR3212-5-115/32"0.626"0.687"
CR3212-6-23/16"0.080"0.125"
CR3212-6-33/16"0.126"0.187"
CR3212-6-43/16"0.188"0.250"
CR3212-6-53/16"0.251"0.312"
CR3212-6-63/16"0.313"0.375"
CR3212-6-73/16"0.376"0.437"
CR3212-6-83/16"0.438"0.500"
CR3212-6-93/16"0.501"0.562"
CR3212-6-103/16"0.563"0.625"
CR3212-6-113/16"0.626"0.687"
CR3212-6-123/16"0.688"0.750"
CR3212-8-31/4"0.126"0.187"
CR3212-8-41/4"0.188"0.250"
CR3212-8-51/4"0.251"0.312"
CR3212-8-61/4"0.313"0.375"
CR3212-8-101/4"0.563"0.625"
Universal Head
CR3213-4-11/8"0.025"0.062"
CR3213-4-21/8"0.063"0.125"
CR3213-4-31/8"0.126"0.187"
CR3213-4-41/8"0.188"0.250"
CR3213-4-51/8"0.251"0.312"
CR3213-4-61/8"0.313"0.375"
CR3213-4-71/8"0.376"0.437"
CR3213-4-81/8"0.438"0.500"
CR3213-4-91/8"0.5010.562"
CR3213-5-15/32"0.031"0.062"
CR3213-5-25/32"0.063"0.125"
CR3213-5-35/32"0.126"0.187"
CR3213-5-45/32"0.188"0.250"
CR3213-5-55/32"0.251"0.312"
CR3213-5-65/32"0.313"0.375"
CR3213-5-75/32"0.376"0.437"
CR3213-5-85/32"0.438"0.500"
CR3213-5-95/32"0.501"0.562"
CR3213-5-105/32"0.563"0.625"
CR3213-5-115/32"0.626"0.687"
CR3213-6-13/16"0.037"0.062"
CR3213-6-23/16"0.063"0.125"
CR3213-6-33/16"0.126"0.187"
CR3213-6-43/16"0.188"0.250"
CR3213-6-53/16"0.251"0.312"
CR3213-6-63/16"0.313"0.375"
CR3213-6-73/16"0.376"0.437"
CR3213-6-83/16"0.438"0.500"
CR3213-6-93/16"0.501"0.562"
CR3213-6-103/16"0.563"0.625"
CR3213-6-113/16"0.626"0.687"
CR3213-6-123/16"0.688"0.750"
CR3213-8-21/4"0.063"0.125"
CR3213-8-41/4"0.188"0.250"
CR3213-8-51/4"0.251"0.312"
CR3213-8-71/4"0.376"0.437"

As listed by LAS Aerospace on 2026-09-30. Check the live listing before ordering: stock and part numbers change.

Where to buy

The link opens LAS Aerospace's own page for this item, so the price and stock you see are theirs and current. We do not copy prices.

The Aviation Point links to third-party manufacturer and distributor websites. We may earn a commission on purchases made through these links, at no additional cost to you. The Aviation Point has no partnership or affiliate agreement with LAS Aerospace, and these links carry no tracking parameters.

Sources

Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close