3003-H14 Soft Aluminum Sheet

A soft, easily formed non-heat-treatable alloy, for fairings, baffles and other non-structural parts.

As listed

FieldValue
SellerAircraft Spruce
Alloy and temper3003-H14
Thicknesses0.020" to 0.063"
SizesFull sheets and 2 × 4 ft pieces
Listing checked2026-09-30

Taken from Aircraft Spruce's product page on 2026-09-30. Where the listing does not state a figure, this table does not either.

What it is for

Not a structural alloy: a repair uses the alloy the SRM specifies. Spruce notes that for 2 × 4 ft pieces the part number ends in 45.

For structure, see 2024-T3.

Sizes listed

ThicknessPNSize
.02003-314104 x 12
.02503-324104 x 12
.03203-334104 x 12
.04003-344104 x 12
.05003-345104 x 12
.06303-346104 x 12
.02003-314204 x 8
.02503-324204 x 8
.03203-334204 x 8
.04003-344204 x 8
.05003-345204 x 8
.06303-346204 x 8
.02003-314304 x 6
.02503-324304 x 6
.03203-334304 x 6
.04003-344304 x 6
.05003-345304 x 6
.06303-346304 x 6
.02003-314404 x 4
.02503-324404 x 4
.03203-334404 x 4
.04003-344404 x 4
.05003-345404 x 4
.06303-346404 x 4
.02003-314452 x 4
.02503-324452 x 4
.03203-334452 x 4
.04003-344452 x 4
.05003-345452 x 4
.06303-346452 x 4

As listed by Aircraft Spruce on 2026-09-30. Check the live listing before ordering: stock and part numbers change.

Where to buy

The link opens Aircraft Spruce's own page for this item, so the price and stock you see are theirs and current. We do not copy prices.

The Aviation Point links to third-party manufacturer and distributor websites. We may earn a commission on purchases made through these links, at no additional cost to you. The Aviation Point has no partnership or affiliate agreement with Aircraft Spruce, and these links carry no tracking parameters.

Sources

Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close