As listed
| Field | Value |
|---|---|
| Seller | LAS Aerospace |
| Seller's item # | H01FNRPQT |
| Angle | 100° |
| Pieces | Die and punch |
| Size | 1/2" diameter, 1/4" long |
| Shank | 0.187" |
| Listing checked | 2026-09-30 |
Taken from LAS Aerospace's product page on 2026-09-30. Where the listing does not state a figure, this table does not either.
What it is for
Two sizes are for screws (#8, #10) and two for rivets (1/8", 5/32"). They fit any 0.187" squeezer, such as the ATS Pro hand squeezer.
The dimpled hole takes a MS20426; hole sizes on the drill chart.
Sizes listed
| Part | Size |
|---|---|
| SB8 | #8 |
| SB10 | #10 |
| SB4264 | 1/8" |
| SB4265 | 5/32" |
As listed by LAS Aerospace on 2026-09-30. Check the live listing before ordering: stock and part numbers change.
Where to buy
The link opens LAS Aerospace's own page for this item, so the price and stock you see are theirs and current. We do not copy prices.
The Aviation Point links to third-party manufacturer and distributor websites. We may earn a commission on purchases made through these links, at no additional cost to you. The Aviation Point has no partnership or affiliate agreement with LAS Aerospace, and these links carry no tracking parameters.
Sources
- LAS Aerospace — Spring Back Dimple Dies — product listing, item H01FNRPQT, checked 2026-09-30.