Side-Grip Cleco Clamp, 3/4" x 1"

A spring clamp that holds sheets at an edge without a hole, installed with the same pliers as a cleco.

As listed

FieldValue
SellerYardstore
Seller's item #11092
Maximum opening3/4"
Reach1"
OperationSpring-loaded, set with cleco pliers
Volume priceReduced unit price from 100
Listing checked2026-09-29

Taken from Yardstore's product page on 2026-09-29. Where the listing does not state a figure, this table does not either.

What it is for

Unlike a cleco it needs no hole, so it holds an edge before drilling. Yardstore lists it for bonding, sealing and gluing too, and says over-tightening is not possible.

The Pro kit carries six of these; the 13-piece kit twelve with pliers.

Where to buy

The link opens Yardstore's own page for this item, so the price and stock you see are theirs and current. We do not copy prices.

The Aviation Point links to third-party manufacturer and distributor websites. We may earn a commission on purchases made through these links, at no additional cost to you. The Aviation Point has no partnership or affiliate agreement with Yardstore, and these links carry no tracking parameters.

Sources

Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close