As listed
| Field | Value |
|---|---|
| Seller | Yardstore |
| Seller's item # | 10701 |
| Face diameter | 1" |
| Offset | 10° |
| Overall length | 3 1/2" |
| Shank | 0.401" |
| Material | High-alloy steel, heat-treated, polished face |
| Listing checked | 2026-09-29 |
Taken from Yardstore's product page on 2026-09-29. Where the listing does not state a figure, this table does not either.
What it is for
Yardstore puts it for spots without perfect alignment. The straight equivalent is the standard flush set; the swivel flush set is the other answer to the same problem.
The countersink it drives into is sized from the drill chart.
Where to buy
The link opens Yardstore's own page for this item, so the price and stock you see are theirs and current. We do not copy prices.
The Aviation Point links to third-party manufacturer and distributor websites. We may earn a commission on purchases made through these links, at no additional cost to you. The Aviation Point has no partnership or affiliate agreement with Yardstore, and these links carry no tracking parameters.
Sources
- Yardstore — 1" x 3 1/2" 10° Offset Flush Set — product listing, item 10701, checked 2026-09-29.