As listed
| Field | Value |
|---|---|
| Seller | LAS Aerospace |
| Seller's item # | P03GL0HHR |
| For | MS21051 series style anchor nuts |
| Rivet drill | #40 on every jig listed |
| Listing checked | 2026-09-30 |
Taken from LAS Aerospace's product page on 2026-09-30. Where the listing does not state a figure, this table does not either.
What it is for
This listing gives the geometry Yardstore's does not: the A and B spacing and the drill for each screw size. The #40 drill is the 3/32" rivet hole on our drill chart.
The US set is Yardstore's 8-piece jig set, which uses the same 518G–518K numbering.
Sizes listed
| Part | Screw Size | A Spacing | B Spacing | D Drill Size |
|---|---|---|---|---|
| Standard (SWS) | ||||
| 518G | #6 | .344 | .139 | #40 |
| 518H | #8 | .344 | .164 | #40 |
| 518J | #10 | .344 | .191 | #40 |
| 518K | 1/4" | .344 | .248 | #40 |
| Miniature (SWM) | ||||
| 518PB | #6 | .218 | .139 | #40 |
| 518PC | #8 | .234 | .164 | #40 |
| 518PD | #10 | .250 | .191 | #40 |
| 518PE | 1/4" | .281 | .248 | #40 |
As listed by LAS Aerospace on 2026-09-30. Check the live listing before ordering: stock and part numbers change.
Where to buy
The link opens LAS Aerospace's own page for this item, so the price and stock you see are theirs and current. We do not copy prices.
The Aviation Point links to third-party manufacturer and distributor websites. We may earn a commission on purchases made through these links, at no additional cost to you. The Aviation Point has no partnership or affiliate agreement with LAS Aerospace, and these links carry no tracking parameters.
Sources
- LAS Aerospace — Single Lug Anchor Nut Drill Jigs — product listing, item P03GL0HHR, checked 2026-09-30.