Drilling, reaming and countersinking
Piloted spotface cutter
Flat-bottom cutter guided by a pilot in the fastener hole. Cuts a flat seat square to the hole so a head, washer, nut or collar bears all round.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
More distributors
AmericaMore distributors coming soon
EuropeMore distributors coming soon
OceaniaMore distributors coming soon
Flat-bottom cutter guided by a pilot in the fastener hole. Cuts a flat seat square to the hole so a head, washer, nut or collar bears all round.
Types and variants
- Interchangeable pilot
- 1/4 in shank
- HSS, four flutes
More drilling, reaming and countersinking
- No picture yet
Reverse cutters
Reverse Spotfacer 1/4" Pilot x 7/16" Diameter
- 1/4 in pilot · 7/16 in cutter
US - No picture yet
Reverse cutters
Reverse Spotfacer 5/16" Pilot x 3/4" Diameter
- 5/16 in pilot · 3/4 in cutter
US - No picture yet
Reverse cutters
Reverse Spotfacer 3/8" Pilot x 3/4" Diameter
- 3/8 in pilot · 3/4 in cutter
US 
Countersinks and dimpling
Countersink cage
- Types1
No distributor yet
Countersinks and dimpling
Countersink pilot
- Types2
No distributor yet- No picture yet
Countersinks and dimpling
Deburring countersink
- Types2
No distributor yet - No picture yet
Countersinks and dimpling
Dimple die gauge
- Types1
No distributor yet - No picture yet
Countersinks and dimpling
Pneumatic dimpling tool
- Types2
No distributor yet