Tool Kits by Job: Apprentice, Line B1 Mechanic and Structures Shop

A kit is the tools of a job, not a box: layout, holes, fasteners and forming. Buy for the work you do and the rivet sizes you install, and use each line to open the guide that explains sizes and types.

View PDF

What it is

Where to buy

Each kit below is grouped by job: layout and measuring, making and finishing the hole, installing and removing the fastener, and cutting and forming the sheet. Every line gives the item, the quantity, the size and the buying guide of the tool.

The apprentice kit covers the training bench and the 3/32 and 1/8 in (2.4 and 3.2 mm) rivets of most skin work. The line B1 kit is what a line mechanic carries to the aircraft: holes, blind rivets, rivet removal, threaded fasteners, torque and safety wire. The structures shop kit holds the bench and shared tools of a repair shop: brakes, rolls, shears and the full sets.

Apprentice kit

JobItemQtySizeGuide
LayoutSteel rule16 in (150 mm)Layout and marking
LayoutFine-point marker and center punch1 each—Layout and marking
LayoutCaliper10 to 6 in (0 to 150 mm)Measuring tools
HoleAir drill motor11/4 in (6.4 mm) chuckDrill motors
HoleDrill bits6 each#40, #30Drill bits
HoleDeburring tool1Swivel bladeDeburring
HoleCountersink cutter, 100°1 each#40 and #30 pilotCountersink cutters
FastenerTemporary fasteners and pliers25 each, 1 pliers3/32 and 1/8 in (2.4 and 3.2 mm)Temporary fasteners
FastenerRivet gun12XRivet guns
FastenerRivet sets, universal and flush1 each3/32 and 1/8 in (2.4 and 3.2 mm)Rivet sets
FastenerBucking bars2General purposeBucking bars
FastenerRivet gauge13/32 to 3/16 in (2.4 to 4.8 mm)Inspection gauges
FastenerPin punch for rivet removal1 each3/32 and 1/8 in (2.4 and 3.2 mm)Rivet removal
FormAviation snips, left, right and straight1 each—Snips and shears
FormHand seamer1—Bending brakes
FormSide-grip clamps6By grip rangeClamps and vises

Line B1 mechanic kit

JobItemQtySizeGuide
LayoutSteel rule and caliper1 each6 in (150 mm)Measuring tools
LayoutInspection mirror and torch1 each—Inspection gauges
HoleDrill motor, straight and 90° angle1 each1/4 in (6.4 mm) chuckDrill motors
HoleDrill bits6 each#40, #30, #21Drill bits
HoleDeburring tool1Swivel bladeDeburring
FastenerBlind rivet hand tool13/32 to 3/16 in (2.4 to 4.8 mm)Blind rivet tools
FastenerRivet removal set13/32 to 3/16 in (2.4 to 4.8 mm)Rivet removal
FastenerTemporary fasteners and pliers25 each, 1 pliers3/32, 1/8 and 5/32 inTemporary fasteners
FastenerHex keys and collar sockets1 setDash -5 to -8Threaded fastener tools
FastenerTorque wrench, calibrated1In-lb rangeTorque wrenches
FastenerSafety wire pliers and wire10.032 in (0.81 mm) wireSafety wire pliers
FormAviation snips, left, right and straight1 each—Snips and shears

Structures shop kit

JobItemQtySizeGuide
LayoutLayout and marking set1—Layout and marking
LayoutMicrometer and caliper1 each0 to 1 in (0 to 25 mm), 0 to 6 in (0 to 150 mm)Measuring tools
LayoutRivet head and countersink gauges1 set—Inspection gauges
HoleAir drill motors, straight and angle2 each1/4 in (6.4 mm) chuckDrill motors
HoleDrill bits, standard and longFull set#40 to 1/4 inDrill bits
HoleStep drills and hole saws1 set—Step drills, hole saws
HoleCountersink cages and cutters, 100°2, 1 set#40 to 3/16 in pilotsCountersink cutters
HoleDimple dies1 set3/32 to 5/32 in (2.4 to 4.0 mm)Dimple dies
HoleHole finders and edge tools1 set#40, #30Hole finders
HoleDeburring tools1 set—Deburring
FastenerRivet guns1 each2X and 3XRivet guns
FastenerRivet sets, universal, flush, offset1 set3/32 to 3/16 in (2.4 to 4.8 mm)Rivet sets
FastenerBucking bars1 set—Bucking bars
FastenerRivet squeezer and yokes1—Rivet squeezers
FastenerRivet cutter13/32 to 3/16 in (2.4 to 4.8 mm)Rivet cutters
FastenerPneumatic blind rivet tool1—Blind rivet tools
FastenerThreaded fastener tools and nutplate jigs1 set—Threaded fastener tools
FastenerTorque wrenches, calibrated2In-lb and ft-lbTorque wrenches
FastenerTemporary fasteners100 each3/32 to 3/16 in (2.4 to 4.8 mm)Temporary fasteners
FormBox and pan brake1—Bending brakes
FormBench shear and snips1, 1 set—Snips and shears
FormSlip roll1—Slip rolls
FormMallets, forming blocks, shrinker and stretcher1 set—Hand-forming tools
FormBench vise with soft jaw caps and C-clamps1, 4—Clamps and vises

What to check when buying a kit

CheckWhat to look for
ContentsCompare line by line with the kit for your job: ready-made kits differ most in what they leave out.
Rivet sizesSets, drills, temporary fasteners and gauges for the same rivet sizes.
Sets and barsHardened, polished faces; shank to suit your rivet gun.
CaseA place for each tool, so a missing tool shows.
Air toolsFittings and pressure to suit the shop air supply.
Torque wrenchesCalibration certificate and label with the date.

Questions people actually ask

Ready-made kit or tool by tool?

Compare the ready-made kit with the table for your job. What it leaves out you buy tool by tool, from the guide on each line.

What does the line B1 kit add to the apprentice kit?

Blind rivet tools, rivet removal, threaded fastener tools, a calibrated torque wrench and safety wire pliers: the work of a line mechanic at the aircraft.

Which rivet sizes should the kit cover?

The sizes you install: 3/32 and 1/8 in (2.4 and 3.2 mm) for most skin work, 5/32 and 3/16 in (4.0 and 4.8 mm) for heavier structure.

Where to buy

AmericaDistributor coming soon
EuropeDistributor coming soon
OceaniaDistributor coming soon

Are you a distributor? Get listed →

Distributors coming soon.

Educational reference only. Not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close