AN161 at a glance

Specification

Item	Value
Type	Turnbuckle fork
Status	Check the current issue before design use.

Part numbers and the data the catalogue prints for each. The standard governs and may list others.

1/162 part numbers

Part no.	MS21252 number	Thread hand	Thread	Length, in	Cable, in	G, in	D, in
AN161-8RS	MS21252-2RS	Right	6-40	1.500	1/16	.109	.190
AN161-8LS	MS21252-2LS	Left	6-40	1.500	1/16	.109	.190

3/322 part numbers

Part no.	MS21252 number	Thread hand	Thread	Length, in	Cable, in	G, in	D, in
AN161-16RS	MS21252-3RS	Right	10-32	1.625	3/32	.156	.190
AN161-16LS	MS21252-3LS	Left	10-32	1.625	3/32	.156	.190

1/82 part numbers

Part no.	MS21252 number	Thread hand	Thread	Length, in	Cable, in	G, in	D, in
AN161-22RS	MS21252-4RS	Right	1/4-28	1.844	1/8	.195	.190
AN161-22LS	MS21252-4LS	Left	1/4-28	1.844	1/8	.195	.190

1/8 or 5/322 part numbers

Part no.	MS21252 number	Thread hand	Thread	Length, in	Cable, in	G, in	D, in
AN161-32RS	MS21252-5RS	Right	1/4-28	1.844	1/8 or 5/32	.218	.250
AN161-32LS	MS21252-5LS	Left	1/4-28	1.844	1/8 or 5/32	.218	.250

Part	Meaning
Format	AN161-<dash>
Example	AN161-8RS — listed as MS21252-2RS

The suffix letters after the dash are R or L (thread hand) then S, as printed in the catalogue.
Catalogue data: the standard governs. Use the part the drawing, SRM or IPC calls for.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.