Specification
Where to buy| Item | Value |
|---|---|
| Type | Right angle pulling head |
| Maker | Cherry Aerospace |
| Weight | 1.20 lb (0.54 kg) |
| Tool sheet | TS-H886, Rev. F, 6-20-2013 |
Part numbers
| Part no. | Size |
|---|---|
| H886-3 | 3/32 in (-3) |
| H886-4 | 1/8 in (-4) |
| H886-5 | 5/32 in (-5) |
| H886-6 | 3/16 in (-6) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| CherryLOCK 'A' code | 3, 4, 5, 6 | all head styles; each size requires a different pulling head configuration (H886-3, -4, -5, -6) |
Riveters
Reconfiguration: nosepiece, jaws and follower
| Fastener | Dia. | Nosepiece | Jaws | Jaw follower | Stem stop |
|---|---|---|---|---|---|
| CherryLOCK 'A' code (H886-3) | 3 | 886-003 | 701B18 | 753A14A | 753A15 |
| CherryLOCK 'A' code (H886-4) | 4 | 886-004 | 701B18 | 753A14A | 753A15 |
| CherryLOCK 'A' code (H886-5) | 5 | 886-005 | 701B18 | 753A14A | 886-008 |
| CherryLOCK 'A' code (H886-6) | 6 | 886-006 | 782-010 | 886-002 | 886-007 |
Cherry's Table 1. Change these parts to install the other fasteners.
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | SEE TABLE 1 | NOSEPIECE | 1 |
| 2 | — | SLEEVE | 1 |
| 3 | G6JN | JAM NUT | 1 |
| 4 | 753A13A | COLLET | 1 |
| 5 | SEE TABLE 1 | JAW SET | 1 |
| 6 | SEE TABLE 1 | JAW FOLLOWER | 1 |
| 7 | P-1003 | SPRING | 1 |
| 8 | SEE TABLE 1 | STEM STOP | 1 |
| 9 | P-706 | O-RING | 1 |
| 10 | 753C2-3 | FRAME | 2 |
| 11 | 753A4 | SHOE BEARING | 1 |
| 12 | 753B3 | COLLET BOLT | 2 |
| Item | Part number | Description | Qty |
|---|---|---|---|
| 13 | 753B5 | LEVER | 1 |
| 14 | P-413 | BUTTON HEAD SCREW | 1 |
| 15 | P-930 | SET SCREW | 1 |
| 16 | 753A16 | GUARD | 2 |
| 17 | 753A10 | PIVOT PIN | 1 |
| 18 | P-954 | LINK | 2 |
| 19 | 753A9 | LINK PIN | 8 |
| 20 | 753B6 | BELL CRANK | 4 |
| 21 | 753A11 | GUIDE PIN | 1 |
| 22 | 753A7 | DRAWBOLT | 1 |
| 23 | 671A16 | JAM NUT | 1 |
| 24 | 753B8 | ADAPTER FITTING | 1 |
Quantities as printed on TS-H886: several differ from the same parts on TS-H753A-456, so check them before ordering. Cherry's sheet misprints the sleeve number, so it is left blank.
Notes from the maker
- Mounting: push collet bolt assembly forward before mounting; engage 1 or 2 threads of drawbolt onto riveter head piston before threading adapter fitting; rotate to desired position and tighten jam nut.
- Clean/inspect nosepiece, jaws, collet and spring every 1000 installations or on failure; replace spring and jaws if worn. Lubricate outside of jaws with Lubriplate or similar light grease. When re-assembling align jaws with jaw follower (items 5 and 6); use Loctite 242 (removable) on all threaded components except as shown.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H886, Rev. F, 6-20-2013 — Right Angle Pulling Head for CherryLOCK 'A' Code
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.