Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H9055, Rev. B, 28 DEC 23 |
Part numbers
| Part no. | Size |
|---|---|
| H9055-3 | 3/32 in (-3) |
| H9055-4 | 1/8 in (-4) |
| H9055-5 | 5/32 in (-5) |
| H9055-6 | 3/16 in (-6) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| CherryLOCK 'A' Code rivets | 3/32" (H9055-3), 1/8" (H9055-4), 5/32" (H9055-5), 3/16" (H9055-6) | separate head per diameter; some materials/grip lengths may not be suitable due to riveter power/stroke - see CherryLOCK 'A' rivet tool selection chart |
Riveters
Reconfiguration: nosepiece, jaws and follower
| Fastener | Dia. | Jaws | Stem stop | Note |
|---|---|---|---|---|
| CherryLOCK 'A' 3/32" | 3/32 (H9055-3) | 711B6-34 | 712A10-1 | insert 960-023 |
| CherryLOCK 'A' 1/8" | 1/8 (H9055-4) | 711B6-34 | 712A10-2 | insert 960-024 |
| CherryLOCK 'A' 5/32" | 5/32 (H9055-5) | 711B6-56 | 712A10-4 | insert 960-025 |
| CherryLOCK 'A' 3/16" | 3/16 (H9055-6) | 711B6-56 | 712A10-5 | insert 960-026 |
Change these parts to install the other fasteners.
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 711A9 | STEM STOP SPRING | 1 |
| 2 | SEE TABLE | (INSERT) | 1 |
| 3 | SEE TABLE | (STEM STOP) | 2 |
| 4 | 9055-002 | SLEEVE | 1 |
| 5 | 711B4 | COLLET | 1 |
| 6 | SEE TABLE | (JAW PAIR SET) | 1 |
| 7 | 711A7 | JAW FOLLOWER | 1 |
| 8 | 711A8 | SPRING FOLLOWER | 1 |
| 9 | 711B5 | DRAWBOLT | 1 |
| 10 | P-1158 | SPRING RETURN | 1 |
| 11 | 711B12 | RETAINER CAP | 1 |
| 12 | 680A25 | SPRING RETAINER CAP | 1 |
| 13 | G6JN | JAM NUT | 1 |
Notes from the maker
- Description and size table: Insert 960-023/-024/-025/-026; Stem stop 712A10-1/-2/-4/-5; Jaw set 711B6-34 (for -3 and -4), 711B6-56 (for -5 and -6) for H9055-3/-4/-5/-6 respectively.
- Inspect active area regularly; clean jaws and jaw cavity inside collet every 1,000 installations; lubricate outside of jaws with Lubriplate. Insert (2) subject to wear: worn inserts cause improper swaging of locking collar, excessive flash and low push-out/tensile values.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H9055, Rev. B, 28 DEC 23 — Pulling Head for CherryLOCK 'A' Code Rivets
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.