Specification
Where to buy| Item | Value |
|---|---|
| Type | Offset pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H782, Rev. H, 26 Mar 15 |
Part numbers
| Part no. | Size |
|---|---|
| H782 | Pulling head |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| CherryMAX / CherryMAX AB / Blindbolt S / MBC Lock Creator / NAS1900 U | 4, 5, 6 | Nosepiece 782-456 and jaw set 701B18 supplied as purchased (6 all aluminum excepted) |
Riveters
Reconfiguration: nosepiece, jaws and follower
| Fastener | Dia. | Nosepiece | Jaws |
|---|---|---|---|
| As supplied | 4,5,6 | 782-456 | 701B18 |
| CherryLOCK 'A' Code | -4 | 886-004 | 701B18 |
| CherryLOCK 'A' Code | -5 | 886-005 | 701B18 |
| NAS1900 (no shift washer) | -4 | 782-4NAS | 701B18 |
| NAS1900 (no shift washer) | -5 | 782-5NAS | 701B18 |
| Blindbolt 'U' Type | -05 | 782-5BB | 701B18 |
| Standard MBC | -4 | 783-4MBC | 701B18 |
| Standard MBC | -5 | 782-5MBC | 701B18 |
| 3 dia. CherryLOCK 'A' Code | 3 | 886-003 | 701B18 |
| Extended 3 dia. CherryLOCK 'A' Code (see Fig. 3) | 3 | 782-3E | 701B18 |
| 3/32" SPR & -3 pull thru NP Rivets | 3 | 782-3 | 701B18 |
| 6 Dia CherryLOCK 'A' Code | 6 | 886-006 | 782-010 |
| Standard MBC | -6 | 782-6MBC | 782-010 |
| CherryMAX 'AB' -6 Alum, NAS1900 'U' Type -4, -5, -6 | 6 (and -4,-5 for NAS1900 U) | 782-6AL | 782-010 |
| NAS1900 (no shift washer) | -6 | 782-6NAS | 782-010 |
Cherry's Table 1. Change these parts to install the other fasteners.
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 783-051 | Frame | 1 |
| 2 | 783-052 | Carrier | 1 |
| 3 | 701B18 | Jaw Set (see Table 1) | 1 |
| 4 | 783-054 | Jaw Follower | 1 |
| 5 | 783-057 | Guard | 1 |
| 6 | P-1428 | Compression Spring | 1 |
| 7 | 783-055 | Plug | 1 |
| 8 | 783-058 | Deflector, Pin | 1 |
| 9 | 671A16 | Jam Nut | 1 |
| 10 | 763A7 | Adaptor, Frame | 1 |
| 11 | 781B6 | Adaptor, Carrier | 1 |
| 12 | 435A60 | Warning Label | 1 |
| 13 | P-1012 | Roll Pin | 1 |
| 14 | 782-456 | Nosepiece (See Table 1) | 1 |
Notes from the maker
- Patent US 7,467,451 B2
- Item 14 (Nosepiece) is replaceable. To install CherryMAX AB -6 all aluminum and CherryLOCK A -6 all aluminum use 782-010 jaws.
- Do not operate with a damaged or missing deflector; keep fingers off active area.
- Clean nosepiece, jaw cavity and inspect jaws and spring every 500 installations or whenever a failure occurs; lubricate outside of jaws with Lubriplate; Loctite 242 (removable) on all threaded components except as shown (no Loctite on adaptor/jam nut threads).
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H782, Rev. H, 26 Mar 15 — Universal Two Jaw Offset Pulling Head
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.