Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H827-8, Rev. C, 8-26-14 |
Part numbers
| Part no. | Size |
|---|---|
| H827-8 | 1/4 in (-8) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| CherryMAX | 8 | nominal 8 diameter CherryMAX fasteners as provided |
Riveters
Reconfiguration: nosepiece, jaws and follower
| Fastener | Dia. | Nosepiece | Jaws | Washer | Note |
|---|---|---|---|---|---|
| CherryMAX oversize 8 diameter | 8 (oversize) | 827-015 | 563C35 | 563A46 | add item 11 (563A46) to the snubber assembly |
Change these parts to install the other fasteners.
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 827-015 | Nosepiece | 1 |
| 2 | 827-014 | Guard | 1 |
| 3 | 827-012 | Drawbolt | 1 |
| 4 | 563C35 | Jaws (set of 3) | 1 |
| 5 | P-1267 | O-Ring | 1 |
| 6 | 827-004 | Snubber Assy | 1 |
| 7 | 827-013 | Drawbolt Extension | 1 |
| 8 | 642A64 | Jam Nut | 1 |
| 9 | 827-011 | Frame | 1 |
| 10 | P-1248 | Roll Pin | 1 |
| 11 | 563A46 | Washer (add only when installing oversize CherryMAX fasteners) | 1 |
Notes from the maker
- Disassembly: unthread drawbolt extension (7) with 3/8" hex key; remove guard (2); remove roll-pin (10) with drift pin; lift drawbolt (3) out of frame (9); to remove jaws (4) use 1" wrench to remove snubber assy (6).
- Lubricate sliding areas between drawbolt (6) and frame (8) regularly with light oil; keep clean; replace worn components; Loctite 242 on threaded components.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H827-8, Rev. C, 8-26-14 — Pulling Head for CherryMAX Rivets (8 diameter)
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.