AN165 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Pin eye (an165) |
| Status | Check the current issue before design use. |
Part numbers
Part numbers and the data the catalogue prints for each. The standard governs and may list others.
1/162 part numbers
| Part no. | MS21254 number | Thread hand | Thread | Length, in | Cable dia., in | J, in | D, in |
|---|---|---|---|---|---|---|---|
| AN165-8RS | MS21254-2RS | Right | 6-40 | 1.500 | 1/16 | .125 | .190 |
| AN165-8LS | MS21254-2LS | Left | 6-40 | 1.500 | 1/16 | .125 | .190 |
3/322 part numbers
| Part no. | MS21254 number | Thread hand | Thread | Length, in | Cable dia., in | J, in | D, in |
|---|---|---|---|---|---|---|---|
| AN165-16RS | MS21254-3RS | Right | 10-32 | 1.625 | 3/32 | .188 | .190 |
| AN165-16LS | MS21254-3LS | Left | 10-32 | 1.625 | 3/32 | .188 | .190 |
5/322 part numbers
| Part no. | MS21254 number | Thread hand | Thread | Length, in | Cable dia., in | J, in | D, in |
|---|---|---|---|---|---|---|---|
| AN165-32RS | MS21254-5RS | Right | 1/4-28 | 1.750 | 5/32 | .219 | .250 |
| AN165-32LS | MS21254-5LS | Left | 1/4-28 | 1.750 | 5/32 | .219 | .250 |
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | AN165-<dash> |
| Example | AN165-8RS — listed as MS21254-2RS |
Notes from the standard
- First letter after the dash is R or L (thread hand); the catalogue prints S for the length listed.
- Catalogue data: the standard governs. Use the part the drawing, SRM or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- AN165 — Turnbuckle Pin Eye (see MS21254) — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.