Peel ply at a glance
Where to buy
Designation
| Item | Value |
|---|---|
| Designation | Peel ply |
| Class | Composites |
| Type | bagging consumable |
Release Ease 234 TFP (porous PTFE-coated fiberglass)
| Property | Value |
|---|---|
| Maximum use temperature | 550 °F (288 °C) |
| Thickness | 0.0024 in (0.060 mm) |
| Colour | Brown |
| Shelf life | Unlimited in original packaging at 72 °F (22 °C) |
| Widths, 100 yd rolls | 38, 50, 60 in (97, 127, 152 cm) |
Airtech data sheet (2018). Airtech says maximum use temperature depends on time and process and recommends testing before use.
Types named by the FAA (p. 7-21)
| Material | Note |
|---|---|
| Polyester | Preferred when heat-set to remove shrinkage |
| Nylon | Can be hard to remove if overheated |
| FEP | Fluorinated ethylene propylene |
| Coated fiberglass | Some coated types can leave contamination on the surface |
FAA-H-8083-31B, p. 7-21.
Notes from the guide
- Check the cure temperature against the peel ply rating.
- Coated types can contaminate a surface to be bonded.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Airtech, Release Ease 234 TFP data sheet (2018-10-09) — porous PTFE-coated fiberglass fabric: maximum use temperature, thickness, shelf life, sizes.
- FAA-H-8083-31B, AMT Handbook — Airframe, Volume 1 (2023), Chapter 7 — peel ply (p. 7-21).
- AC 43.13-1B, Change 1, Chapter 3, Fiberglass and Plastics — paragraph 3-2 (pp. 3-1 to 3-2).
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.