Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Weight | 0.2 lb (0.09 kg) |
| Tool sheet | TS-H746, Rev. C, 3-2-12 |
Part numbers
| Part no. | Size |
|---|---|
| H746-4MBC | 1/8 in (-4) |
| H746-5MBC | 5/32 in (-5) |
| H746-6MBC | 3/16 in (-6) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| Standard MBC 1/8" | 4 | H746-4MBC |
| Standard MBC 5/32" | 5 | H746-5MBC |
| Standard MBC 3/16" | 6 | H746-6MBC |
Riveters
Reconfiguration: nosepiece, jaws and follower
| Fastener | Dia. | Nosepiece | Note |
|---|---|---|---|
| Standard MBC 1/8" | 4 | 845-032 | Pulling head H746-4MBC; sleeve 845-031-4 |
| Standard MBC 5/32" | 5 | 845-028 | Pulling head H746-5MBC; sleeve 845-031-5 |
| Standard MBC 3/16" | 6 | 845-029 | Pulling head H746-6MBC; sleeve 845-031-6 |
Cherry's Table 1. Change these parts to install the other fasteners.
Parts list
Notes from the maker
- Each pulling head sold separately: H746-4MBC, H746-5MBC, H746-6MBC
- Jaw adjustment via sleeve and jam nut.
- Clean and inspect nosepiece, jaws, collet & spring every 1000 installations or whenever a failure occurs; replace spring and jaws if worn. Lubricate outside of jaws with Lubriplate or similar light grease. Loctite 242 (removable) on threaded components except as shown. Align jaws with jaw follower on reassembly (items 4 and 5).
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H746, Rev. C, 3-2-12 — Straight Pulling Head for standard MBC blind rivets
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.