Specification
Where to buy| Item | Value |
|---|---|
| Type | All pneumatic riveter |
| Maker | Cherry Aerospace |
| Air pressure | 90 to 110 psi (6.2 to 7.6 bar) |
| Stroke | 0.750 in (19.05 mm) |
| Pulling force | 550 lb (2.45 kN) at 90 psi |
| Item | Value |
|---|---|
| Cycle time | One second approx. |
| Weight | 2 lb (0.91 kg) |
| Noise level | 60 dB(A) |
| Vibration | Less than 2.5 m/s² |
| Air consumption | 0.05 SCF/cycle (1.42 L/cycle) |
Part numbers
Cherry's part numbers for this tool, as the catalog lists them.
Riveter2 part numbers
| Part no. | Item |
|---|---|
| G902 | Feed-through riveter |
| G902-15 | Side-eject riveter |
G902 and G902-15 pulling heads
| Riveter | Pulling head | Rivet | Rivet diameters | Max. grip |
|---|---|---|---|---|
| G902 | H902-3NPR | Nut-plate, SPR | Nut-plate 3/32, 2.5 mm, 3 mm; SPR 3/32 | -8 |
| G902 | H902-4NPR, H701B-456 | Nut-plate | 1/8 | -8 |
| G902 | H955 | CherryLOCK 'A' | 3/32 | -8 |
| G902-15 | H9015-3C | Nut-plate, SPR | Nut-plate 3/32, 2.5 mm, 3 mm; SPR 3/32 | -9 |
| G902-15 | H9055-3 | CherryLOCK 'A' | 3/32 | -9 |
| G902-15 | H9015-4C | Nut-plate | 1/8 | -9 |
Maximum grip installed on the first stroke. Pulling heads are not furnished with the riveter.
Notes from the maker
- Extensions are available for the G902 to allow the pulling heads to reach limited access areas.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Fastening Systems for Aerospace Tool Catalog CA-1001, p. 21 — Specifications, pulling heads and part numbers.
- Cherry Aerospace, Tool Manual TM-G902, Rev. B, 06/13/08 — Specifications, operation, pulling heads and maintenance.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.