AE246 at a glance

Specification

Item	Value
Type	Hose
Status	Hose sizes -4 to -10 as listed; the pn is the hose size designation.

Dimension, in	-4	-6	-8	-10
TS — Tube size	1/4	3/8	1/2	5/8
ID — Hose I.D. (min.)	.212	.298	.391	.485
OD — Hose O.D. (max.)	.390	.475	.605	.720
BR — Min. bend radius, in	1.50	2.50	2.88	3.25
OP — Operating, psi	3000	3000	3000	3000
PR — Proof, psi	6000	6000	6000	6000
BH — Min. burst, high temp., psi	12000	10500	10500	9000
BR2 — Min. burst, room temp., psi	16000	14000	14000	12000
TH — Fitting thread	.4375-20	.5625-18	.750-16	.875-14
LC — Size code letter	E	G	H	J

Dimensions in inches as tabulated in the catalogue listing; the standard governs. Blank cells: not stated in the listing.

Part no.	Size	Tube size	Hose I.D. (min.), in	Hose O.D. (max.), in	Fitting thread
AE246-4	1/4	1/4	.212	.390	.4375-20
AE246-6	3/8	3/8	.298	.475	.5625-18
AE246-8	1/2	1/2	.391	.605	.750-16
AE246-10	5/8	5/8	.485	.720	.875-14

Part numbers as listed. The standard governs and may list other sizes.

Part	Meaning
Format	AE246-<dash>
Example	AE246-6 — Hose size -6

Hose size -4 to -10 (the part is identified by hose size; assemblies use the key AE246 0000 - G - 01: base number, size code, fitting code, length in inches).
Construction: Teflon hose reinforced with Hi-Pac single wire braid; meets the requirements of AS1339. Fluid temperature -67°F to +400°F. Conductive: tube capable of conducting 6 µA (sizes -4, -6, -8) or 12 µA (-10) at 1,000 volts.
Fittings: 3-piece "super gem" and 2-piece "super-C" permanently attached fittings in crescent steel (304; sleeve 17-4 PH). Fire sleeve AE102 available on assemblies.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

AE246 — AE246 High Pressure Teflon Hose, Wire Reinforced — nominal sizes and part numbers.