Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Weight | 0.2 lb (0.09 kg) |
| Tool sheet | TS-H84C-8MB, Rev. C, 06/09/08 |
Part numbers
| Part no. | Size |
|---|---|
| H84C-8MB | 1/4 in (-8) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| MAXIBOLT (Blind Bolt) 'S' Type | -8 | nose piece 652-104 |
Riveters
Reconfiguration: nosepiece, jaws and follower
| Fastener | Dia. | Nosepiece | Jaws | Jaw follower | Note |
|---|---|---|---|---|---|
| MAXIBOLT 'U' type -8 | -8 | 652-106 | 652-102 | 652-042 | for U type use 652-106 nose piece |
Change these parts to install the other fasteners.
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | P-1455 | Compression Spring | 1 |
| 2 | 652-042 | Jaw Follower | 1 |
| 3 | 652-102 | Jaw Set | 1 |
| 4 | 513-057 | O-Ring | 1 |
| 5 | 652-101 | Collet | 1 |
| 6 | 652-060 | Sleeve | 1 |
| 7 | 652-104 | Nose Piece (U-type uses 652-106) | 1 |
Notes from the maker
- * U-Type uses 652-106 (nose piece).
- Lubricate outside configuration of the jaw set with Lubriplate or similar light lubricant. Clean nose piece, jaw set and collet every 1,000 installations or on failure.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H84C-8MB, Rev. C, 06/09/08 — High Performance MAXIBOLT Pulling Head for -8 Diameter MAXIBOLTs (BlindBolts)
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.