Specification
Where to buy| Item | Value |
|---|---|
| Type | Sandwich panel insert |
| Material | Carbon steel; add A for aluminum or C for corrosion-resistant steel |
| Status | Check the current issue before design use. |
Part numbers
Part numbers commonly stocked. The standard governs and may list others.
.1640-323 part numbers
| Part no. | J, in | Length, in |
|---|---|---|
| NAS1833-08-250 | .367 | .250 |
| NAS1833-08-375 | .367 | .375 |
| NAS1833-08-500 | .367 | .500 |
.1900-325 part numbers
| Part no. | J, in | Length, in |
|---|---|---|
| NAS1833-3-250 | .367 | .250 |
| NAS1833-3-300 | .367 | .300 |
| NAS1833-3-375 | .367 | .375 |
| NAS1833-3-500 | .367 | .500 |
| NAS1833-3-750 | .367 | .750 |
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | NAS1833-<size>-<length> |
| Example | NAS1833-3-375 — Thread and length as in its row of the table |
Notes from the standard
- No letter after the basic part number: carbon steel; A: aluminum; C: corrosion-resistant steel.
- The size column is the thread; the last three digits of the dash number are the length in thousandths of an inch.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- NAS1833 — Insert, Thru Threaded, Sandwich Panel — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.