AN175 at a glance

Specification

Item	Value
Type	Close tolerance bolt
Status	Check the current issue before design use.

Dimension, in	.3125-24
Thread	.3125-24

Thread as stated for the standard. Head and shank dimensions are not shown here: take them from the standard.

Part numbers commonly stocked, with grip and length. The standard governs and may list others.

.3125-2441 part numbers

Part	Meaning
Format	AN175-<dash>
A	Variant: Undrilled shank (after the dash)
C	Variant: Corrosion resistant steel (after the basic number)
H	Variant: Drilled head (after the basic number)
Example	AN175-10A — Close tolerance bolt, .3125-24 thread, grip 9/16, length 1-3/32, drilled shank

A after the dash number: undrilled shank (rows without A are drilled).
C after the basic number: corrosion resistant steel. H after the basic number: drilled head. These variants appear in the rows with C or H in the number.
Uncommon: may require lead time and factory minimums.
Part number format as commonly written; check the standard for the exact format.
Approved data governs. Use the bolt the SRM, drawing or IPC calls for.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

AN175 — Bolt, Close Tolerance, Hexagon Head — nominal sizes and part numbers.