HL63 at a glance

Specification

Item	Value
Type	Hi-Lok pin, 100° flush shear head, 1/64 oversize
Material	Alloy steel
Strength	95,000 psi shear min.; 160,000-180,000 psi tensile
Status	Check the current issue before design use.

Dimension, in	10-32-UNJF-3A Modified	1/4-28UNJF-3A Modified
Nominal diameter	13/64	17/64
A — Head diameter (max / min)	.3016 – .2966	.3948 – .3898
B — Ref. (see drawing)	.325	.395
D — Shank diameter (max / min)	.2026 – .2016	.2651 – .2641
TD — Threaded-end diameter (max / min)	.1840 – .1810	.2440 – .2410
G — G, ref.	.035	.045
H — H (max / min, see drawing)	.074 – .064	.080 – .077
R — R, radius (see drawing)	.025 – .015	.025 – .015
Thread	10-32-UNJF-3A Modified	1/4-28UNJF-3A Modified
Double shear, lb min	6,130	10,490
Tension, lb min	2,000	3,700

Dimensions as tabulated in the catalogue, by first dash number (nominal diameter). Max – min where a tolerance is shown.

Every part number, grouped by nominal diameter; the number after the second dash is the max grip in 1/16 in.

13/6411 part numbers

17/6411 part numbers

Part	Meaning
Format	HL63PB<dash>
Example	HL63PB6-2 — 13/64 nominal diameter, max grip 1/8 in

The -5 size is not listed for this oversize pin: the catalogue says use HL19PB6.
Approved data governs. Use the pin the drawing, SRM or IPC calls for.
Grip: the number after the second dash is the max grip in 1/16 in (dash -2 = 1/8 in, -3 = 3/16 in, and so on). Maximum-minimum values are shown as max – min.
Collars listed for this pin in the catalogue quick-reference chart: HL79, HL82, HL94.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

HL63 — Hi-Lok Pin, 100° Flush Shear Head, 1/64 Oversize for HL19, Alloy Steel — nominal sizes and part numbers.