CAMLOC2600 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Quarter-turn stud |
| Material | Carbon steel or stainless steel, by part number |
| Status | Manufacturer part. Check the manufacturer for any later revision before ordering. |
Part numbers
| Part no. | Type | Total panel thickness, in |
|---|---|---|
| 2600-2 | Slotted, carbon steel | .060-.089 |
| 26S8-2 | Phillips, carbon steel | .060-.089 |
| 2600-3 | Slotted, carbon steel | .090-.119 |
| 26S8-3 | Phillips, carbon steel | .090-.119 |
| 2600-4 | Slotted, carbon steel | .120-.149 |
| 26S8-4 | Phillips, carbon steel | .120-.149 |
| 2600-5 | Slotted, carbon steel | .150-.179 |
| 26S8-5 | Phillips, carbon steel | .150-.179 |
| 2600-6 | Slotted, carbon steel | .180-.209 |
| 26S8-6 | Phillips, carbon steel | .180-.209 |
| 2600-7 | Slotted, carbon steel | .210-.239 |
| 26S8-7 | Phillips, carbon steel | .210-.239 |
| 2600-8 | Slotted, carbon steel | .240-.269 |
| 26S8-8 | Phillips, carbon steel | .240-.269 |
| 2600-9 | Slotted, carbon steel | .270-.299 |
| 26S8-9 | Phillips, carbon steel | .270-.299 |
| 2600-10 | Slotted, carbon steel | .300-.329 |
| 26S8-10 | Phillips, carbon steel | .300-.329 |
| Part no. | Type | Total panel thickness, in |
|---|---|---|
| 2600-11 | Slotted, carbon steel | .330-.359 |
| 26S8-11 | Phillips, carbon steel | .330-.359 |
| 2600-12 | Slotted, carbon steel | .360-.389 |
| 26S8-12 | Phillips, carbon steel | .360-.389 |
| 2600-14 | Slotted, carbon steel | .420-.449 |
| 26S8-14 | Phillips, carbon steel | .420-.449 |
| 2600-15 | Slotted, carbon steel | .450-.479 |
| 26S8-15 | Phillips, carbon steel | .450-.479 |
| 2600-16 | Slotted, carbon steel | .480-.509 |
| 26S8-16 | Phillips, carbon steel | .480-.509 |
| 2600-18 | Slotted, carbon steel | .540-.569 |
| 2600-1S | Slotted, stainless steel | .030-.059 |
| 2600-1SW | Winged, stainless steel | .030-.059 |
| 2600-2S | Slotted, stainless steel | .060-.089 |
| 26S51-2 | Phillips, stainless steel | .060-.089 |
| 2600-2SW | Winged, stainless steel | .060-.089 |
| 2600-3S | Slotted, stainless steel | .090-.119 |
| 26S51-3 | Phillips, stainless steel | .090-.119 |
| Part no. | Type | Total panel thickness, in |
|---|---|---|
| 2600-3SW | Winged, stainless steel | .090-.119 |
| 2600-4S | Slotted, stainless steel | .120-.149 |
| 26S51-4 | Phillips, stainless steel | .120-.149 |
| 2600-4SW | Winged, stainless steel | .120-.149 |
| 2600-5S | Slotted, stainless steel | .150-.179 |
| 26S51-5 | Phillips, stainless steel | .150-.179 |
| 2600-5SW | Winged, stainless steel | .150-.179 |
| 2600-6S | Slotted, stainless steel | .180-.209 |
| 26S51-6 | Phillips, stainless steel | .180-.209 |
| 2600-6SW | Winged, stainless steel | .180-.209 |
| 2600-7S | Slotted, stainless steel | .210-.239 |
| 26S51-7 | Phillips, stainless steel | .210-.239 |
| 2600-7SW | Winged, stainless steel | .210-.239 |
| 2600-8S | Slotted, stainless steel | .240-.269 |
| 26S51-8 | Phillips, stainless steel | .240-.269 |
| 2600-8SW | Winged, stainless steel | .240-.269 |
Part numbers commonly stocked. The standard governs and may list others.
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | CAMLOC2600-<dash> |
| Example | 2600-4 — Slotted, carbon steel, for .120-.149 total thickness |
Notes from the standard
- Panel thickness is the total thickness of the stack with the listed receptacle; the part number's dash number sets the stud length.
- Thickness ranges are with the 212-12 receptacle.
- Stud length S = .73 + (.03 x dash number), as printed in the listing.
- Phillips carbon steel numbers (26S8-) stop at -16; the listing shows no -18. 26S51-1 is not listed.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- CAMLOC2600 — Quarter-Turn Fastener Stud, 2600 Series, Protruding Head — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.