H84A6E-8MB — straight pulling head for 8 Dia MAXIBOLTs

Extended Pulling Head for 8 Diameter BlindBolts (MAXIBOLTs), 6 inch extension. Everything below comes from Cherry's tool sheet TS-H84A6E-8MB.

View PDF

Specification

Where to buy
ItemValue
TypeStraight pulling head
MakerCherry Aerospace
Weight4.2 lb (1.91 kg)
Tool sheetTS-H84A6E-8MB, Rev. A, 14-MAY-19

Part numbers

Part no.Size
H84A6E-8MB1/4 in (-8)

Cherry's part numbers on this tool sheet.

What it installs as supplied

FastenerDiameterNote
8 Dia MAXIBOLTs (Blind Bolts), S type (nosepiece 652-035)8where a 6 inch extension is needed

Riveters

RiveterAdapterNote
G84—power riveter
G84-LS744-700split power riveter

Reconfiguration: nosepiece, jaws and follower

FastenerDia.NosepieceJawsJaw followerNote
8 Dia MAXIBOLT U-type fasteners8652-179865C25652-031Use 652-179 for U-type fasteners

Change these parts to install the other fasteners.

Parts list

ItemPart numberDescriptionQty
1652-035Nosepiece (see notes)1
2975-0486" Extended Sleeve1
3652-1116" Collet Extension1
4P-1425Compression Spring1
5652-031Jaw Follower1
6865C25Jaw Set (3 jaws)1
7652-030Collet1

Notes from the maker

  • * Use 652-179 for U-type fasteners.
  • Collet Assembly = items 3 through 7.
  • Mount: thread collet assembly onto riveter head piston; depress trigger and attach sleeve assembly onto bayonet mount.
  • Lubricate outside configuration of the jaw set with Lubriplate or similar light lubricant. Clean nose piece, jaw set and collet every 1,000 installations or on failure.

Where to buy

AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Sources

Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close