Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H744A-8, Rev. A, 02/05/07 |
Part numbers
| Part no. | Size |
|---|---|
| H744A-8 | 1/4 in (-8) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| CherryMAX | 8 (1/4" nominal and oversize) | all materials, head styles and grip lengths |
Riveters
| Riveter | Adapter | Note |
|---|---|---|
| G744 | — | fits directly on G-744 CherryMAX riveter |
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| A | 701B25 | Retaining Ring | 1 |
| B | 701B24 | Stem Stop | 2 |
| C | 744B11 | Sleeve | 1 |
| D | 642A64 | Jam Nut | 1 |
| E | 744A12A | Collet | 1 |
| F | 743B54 | Jaws | 1 set |
| G | 744A13A | Jaw Follower | 1 |
| H | P111 | O-Ring | 1 |
| I | P964 | Spring | 1 |
Notes from the maker
- Install: insert spring into head piston (6); place jaws inside collet, O-ring over jaw follower, screw onto head piston; thread outer sleeve (with jam nut) into head cylinder (1); tighten jam nut.
- Keep pulling head clean, especially around the riveting end; adhesives, chips, sealants clog the jaw serrations and may cause stem slippage.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H744A-8, Rev. A, 02/05/07 — Pulling Head for 1/4" CherryMAX rivets
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.