Specification
Where to buy| Item | Value |
|---|---|
| Type | Offset pulling head |
| Maker | Cherry Aerospace |
| Weight | 0.5 lb (0.23 kg) |
| Tool sheet | TS-H781A-456, Rev. D, 12/29/16 |
Part numbers
| Part no. | Size |
|---|---|
| H781A-456 | -4, -5, -6 |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter |
|---|---|
| CherryMAX Bulb & 'AB' | 4, 5, 6 |
| MAXIBOLT 'S' type | 04, 05 |
| Cherry 1900 'U' type | 04, 05 |
| MBC Lock Creator | 4, 5, 6 |
Riveters
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 781-012 | MACHINED FRAME | 1 |
| 2 | P596 | SET SCREW | 1 |
| 3 | 781-013 | DRAWBAR | 1 |
| 4 | P1503 | DOWEL PIN | 1 |
| 5 | P1257 | ROLL PIN | 1 |
| 6 | 781-004 | JAW | 1 |
| 7 | P1135 | COMPRESSION SPRING | 1 |
| 8 | 781-005 (781C5) | SADDLE | 1 |
| 9 | 783-057 | GUARD | 1 |
| 10 | 781-014 | SWIVEL ADAPTER | 1 |
| 11 | P1504 | CAP SCREW | 1 |
| 12 | 671A16 | JAM NUT | 1 |
| 13 | P1012 | ROLL PIN | 1 |
| 14 | P1507 | 3/32 HEX WRENCH | 1 |
Notes from the maker
- CAUTION: make sure set-screw (item 2) is tightened and riveter attached to air source.
- Inspect regularly, keep active area clean. Lubricate all moving parts with Lubriplate or similar light grease. After 1000 installations or on failure: clean and inspect front surface; clean jaw, compression spring and saddle (items 6, 7, 8), replace if worn; apply Lubriplate on moving surfaces.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H781A-456, Rev. D, 12/29/16 — Compact Single Jaw Offset Pulling Head
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.