Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H9044-8, Rev. C, 8/11/17 |
Part numbers
| Part no. | Size |
|---|---|
| H9044-8 | 1/4 in (-8) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| CherryLOCK 'A' code | 8 | 1/4 inch |
Riveters
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 9044-012 | Insert | 1 |
| 2 | 711A9 | Spring, Stem Stop | 1 |
| 3 | 712A10-3 | Stem Stop | 2 |
| 4 | 9044-011 | Sleeve | 1 |
| 5 | 680A25 | Spring | 1 |
| 6 | 712B4 | Collet | 1 |
| 7 | 513-077 | Jaws | 1 |
| 8 | 712A7 | Follower | 1 |
| 9 | 712A8 | Spring | 1 |
| 10 | 712B5 | Drawbolt | 1 |
Notes from the maker
- Make sure jaws and all internal components of collet are properly located before use.
- Inspect active area regularly. Clean jaws and jaw cavity inside collet every 1,000 installations. Lubricate outside of jaws with Lubriplate or similar light grease. Use Loctite 242 (removable) on threaded components.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H9044-8, Rev. C, 8/11/17 — Pulling Head for CherryLOCK 'A' Code Rivets (1/4 inch)
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.