Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Weight | 0.2 lb (0.09 kg) |
| Tool sheet | TS-H84C-()NP, 07/03/07 |
Part numbers
Cherry's part numbers on this tool sheet.
Pulling head5 part numbers
| Part no. |
|---|
| H84C-249NP |
| H84C-280NP |
| H84C-311NP |
| H84C-343NP |
| H84C-404NP |
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| Cherry Rivetless NutPlate (short stem and standard) | any RNP size with correct nose piece | select by installation hole diameter (Table 1) |
Riveters
Reconfiguration: nosepiece, jaws and follower
| Fastener | Pulling head | Nosepiece | Note |
|---|---|---|---|
| Rivetless NutPlate, hole .249" Min | H84C-249NP | 652-117 | insert 652-120 |
| Rivetless NutPlate, hole .280" Min | H84C-280NP | 652-118 | insert 652-121 |
| Rivetless NutPlate, hole .311" Min | H84C-311NP | 652-119 | insert 652-122 |
| Rivetless NutPlate, hole .343" Min | H84C-343NP | 652-126 | insert 652-127 |
| Rivetless NutPlate, hole .404" Min | H84C-404NP | 652-107 | insert 652-108 |
Cherry's Table 1. Change these parts to install the other fasteners.
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | P1455 | COMPRESSION SPRING | 1 |
| 2 | 652-042 | JAW FOLLOWER | 1 |
| 3 | 652-109 | JAW SET | 1 |
| 4 | 513-057 | O-RING | 1 |
| 5 | 652-101 | COLLET | 1 |
| 6 | 652-060 | SLEEVE | 1 |
| 7 | See Table 1 | INSERT | 1 |
| 8 | See Table 1 | NOSE PIECE | 1 |
Notes from the maker
- Installation hole diameters are minimums.
- Collet assembly = items 1-5; sleeve assembly = items 6-8. PATENT PENDING.
- Clean nose piece, jaw set and collet every 1,000 installations or on failure; wire brush to clean copper deposited inside jaw set. Lubricate outside of jaw set with Lubriplate. Replace worn or broken components. Loctite 242 (removable) on nose piece and collet threads when re-assembling.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H84C-()NP, 07/03/07 — RNP Pulling Head (installs up to 9/16" material thickness)
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.