HL70 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Hi-Lok collar, shear |
| Material | 2024-T6 aluminum alloy |
| Strength | Shear application |
| Status | Check the current issue before design use. |
Dimensions by size
| Dimension, in | 8-32UNJC-3B | 10-32UNJF-3B | 1/4-28UNJF-3B | 5/16-24UNJF-3B |
|---|---|---|---|---|
| Pin nominal diameter | 5/32 | 3/16 | 1/4 | 5/16 |
| A — Collar diameter (max / min) | .292 – .288 | .307 – .303 | .412 – .408 | .518 – .512 |
| B — Bore diameter (max / min) | .173 – .166 | .200 – .192 | .261 – .252 | .325 – .314 |
| L — Length | .447 – .427 | .457 – .437 | .552 – .532 | .672 – .652 |
| Thread | 8-32UNJC-3B | 10-32UNJF-3B | 1/4-28UNJF-3B | 5/16-24UNJF-3B |
| Collar UTS, lb min | 1,400 | 1,600 | 3,000 | 5,000 |
| Torque-off, in-lb | 15-25 | 25-35 | 60-80 | 130-160 |
Dimensions as tabulated in the catalogue, by dash number (pin nominal diameter). Max – min where a tolerance is shown.
Part numbers
Every collar dash number listed, by pin diameter.
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | HL70-<dash> |
| Example | HL70-5 — 5/32 nominal pin diameter |
Notes from the standard
- Max – min values shown as max – min. Approved data governs.
- Pins this collar is listed for in the catalogue: HL18, HL19 (standard collar).
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- HL70 — Hi-Lok Collar, Shear, Aluminum Alloy — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.