Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H743A, Rev. B, 07/08/11 |
Part numbers
Cherry's part numbers on this tool sheet.
Pulling head1 part number
| Part no. |
|---|
| H743A-5C6Z |
3/16 in (-6)3 part numbers
| Part no. |
|---|
| H743A-6K |
| H743A-6T |
| H743A-6V |
1/4 in (-8)4 part numbers
| Part no. |
|---|
| H743A-8K |
| H743A-8T |
| H743A-8V |
| H743A-8Z |
What it installs as supplied
| Fastener | Diameter |
|---|---|
| Commercial rivets with mandrel diameters .100 to .170 inch | — |
Riveters
| Riveter | Adapter | Note |
|---|---|---|
| G-703 | — | |
| G-743 | — | |
| G-780 | — | |
| G-745 | — | must be equipped with 745A31 Ejector Tube |
Nosepiece selection
| Fastener | Dia. | Nosepiece | Jaws | Jaw follower | Note |
|---|---|---|---|---|---|
| Commercial rivet: N ALL; Q ALL | 3/16 | 743A7-5C6Z | 743C55 | 743B93 | Pulling head No. H743A-5C6Z |
| Commercial rivet: K-T ALL | 3/16 | 743C53 | 743C55 | 743B93 | Pulling head No. H743A-6K |
| Commercial rivet: T BSPT | 3/16 | 703A25-6T | 743C55 | 743B93 | Pulling head No. H743A-6T |
| Commercial rivet: G ALL; Mono-Bolt ALL | 3/16 | 743B35 | 743C55 | 743B93 | Pulling head No. H743A-6V |
| Commercial rivet: N ALL; Q ALL | 1/4 | 743A7-8Z | 743C55 | 743B93 | Pulling head No. H743A-8Z |
| Commercial rivet: T BSPT | 1/4 | 743A25-8T | 743C55 | 743B93 | Pulling head No. H743A-8T |
| Commercial rivet: K-T ALL; Mono-Bolt ALL | 1/4 | 743B32 | 743C55 | 743B93 | Pulling head No. H743A-8V |
| Commercial rivet: K-T ALL | 1/4 | 743C51 | 743C55 | 743B93 | Pulling head No. H743A-8K |
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | See nosepiece selection table | Nosepiece | 1 |
| 2 | 743C55 | Jaws (3 pcs) | set |
| 3 | 743B93 | Jaw | 1 |
| 4 | 743B91 | Sleeve | 1 |
| 5 | 743B92 | Collet | 1 |
| 6 | P-1195 | O-Ring | 2 |
| 7 | 743B94 | Spring, Follower | 1 |
| 8 | 743A95 | Cushion | 1 |
| 9 | 732A8 | Jaw Spring | 1 |
| 10 | 743A14-8Z | Ejection Tube | 1 |
| 11 | 743A18 | Jam Nut | 1 |
Notes from the maker
- 3-piece jaws; 2 O-rings (6) go over jaw follower (3).
- Keep head clean and dry, parts securely tightened. Only lubrication: a little Lubriplate inside the cone of the collet.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H743A, Rev. B, 07/08/11 — Pulling Head (commercial rivets)
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.