PE21101-3 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Head | 130° flat countersunk |
| Drive | Torq-Set recess |
| Status | Check the current issue before design use. |
Part numbers and lengths
Sizes commonly stocked. The standard governs and may list other lengths.
10-3211 part numbers
| Part no. | Length, in | Grip, in |
|---|---|---|
| PE21101-3-1SD | 13/32 | — |
| PE21101-3-2CP | 15/32 | 1/8 |
| PE21101-3-2SD | 15/32 | 1/8 |
| PE21101-3-3CP | 17/32 | 3/16 |
| PE21101-3-3SD | 17/32 | 3/16 |
| PE21101-3-4CP | 19/32 | 1/4 |
| PE21101-3-4SD | 19/32 | 1/4 |
| PE21101-3-6CP | 23/32 | 3/8 |
| PE21101-3-6SD | 23/32 | 3/8 |
| PE21101-3-8SD | 27/32 | 1/2 |
| PE21101-3-10SD | — | 5/8 |
Part number
Notes from the standard
- Letters after the dash number: S, steel alloy; D, cadmium-plated steel alloy; C, corrosion-resistant steel; P, passivated corrosion-resistant steel.
- Grip of -1SD is printed illegibly in the listing; it is left blank.
- Part number written as the listing writes it; the standard governs the exact format.
- Approved data governs. Use the screw the SRM, drawing or IPC calls for.
- Length of PE21101-3-10SD is left blank: the listed length does not follow the length-grip pattern of the series. Confirm against the standard.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- PE21101-3 — Screw, 130° Flat Head, Torq-Set Recess, 10-32 — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.