Specification
Where to buy| Item | Value |
|---|---|
| Type | Double action pneumatic-hydraulic riveter |
| Maker | Cherry Aerospace |
| Air pressure | 90 psi (6.2 bar) min., 110 psi (7.6 bar) max. |
| Stroke | 0.906 in (23.01 mm) |
| Pulling force | 1,220 lb (5.43 kN) at 90 psi |
| Item | Value |
|---|---|
| Weight | 5.75 lb (2.61 kg) |
| Noise level | Less than 69 dB(A) |
| Vibration | Less than 2.5 m/s² |
| Air consumption | 0.25 SCF/cycle (7.08 L/cycle) |
| Mounting system | Custom, compatible only with double action pulling heads (H681) |
Part numbers
| Part no. | Size | Item |
|---|---|---|
| G700 | Riveter | Riveter only |
Cherry's part numbers for this tool, as the catalog lists them.
Standard wiredraw CherryLOCK rivets (NAS1398 and NAS1399)
| Dia. | Tool | Al, Monel univ. (CR2163, CR2263, CR2563) | Al, Monel flush (CR2162, CR2262, CR2562) | Stainless univ. (CR2643, CR2653, CR2663) | Stainless flush (CR2642, CR2652, CR2662) | Tool | Al, Monel NAS1097 flush (CR2164, CR2564) | Stainless NAS1097 flush (CR2644, CR2664) |
|---|---|---|---|---|---|---|---|---|
| -3 | H681-3C | — | — | All grips | All grips | — | — | — |
| -4 | H681-4C | All grips | All grips | All grips | All grips | H681-4S | All grips | All grips |
Bulb type CherryLOCK rivets (NAS1738 and NAS1399)
| Dia. | Tool | Univ. (CR2249, CR2539, CR2839) | Flush (CR2238, CR2248, CR2538, CR2838) | Tool | 156° flush (CR2540, CR2840) | Tool | Unisink (CR2235, CR2245, CR2545, CR2845) |
|---|---|---|---|---|---|---|---|
| -4 | H681-4C | All grips | All grips | H681-4F | All grips | H681B166-4 | All grips |
Notes from the maker
- Pulling heads are not furnished with the riveter and must be ordered separately.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Fastening Systems for Aerospace Tool Catalog CA-1001, p. 12 — Specifications, pulling heads and part numbers.
- Cherry Aerospace, Tool Manual TM-G700, Rev. A, 05/09/07 — Specifications, operation, pulling heads and maintenance.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.