Specification
Where to buy| Item | Value |
|---|---|
| Type | Hinge pin |
| Status | Check the current issue before design use. |
Part numbers
Part numbers and the data the catalogue prints for each. The standard governs and may list others.
.0622 part numbers
| Part no. | Diameter, in | Finish |
|---|---|---|
| MS20253-1-7200 | .062 | Passivated |
| MS20253-P1-7200 | .062 | Cadmium plated |
.0892 part numbers
| Part no. | Diameter, in | Finish |
|---|---|---|
| MS20253-2-7200 | .089 | Passivated |
| MS20253-P2-7200 | .089 | Cadmium plated |
.1172 part numbers
| Part no. | Diameter, in | Finish |
|---|---|---|
| MS20253-3-7200 | .117 | Passivated |
| MS20253-P3-7200 | .117 | Cadmium plated |
.1792 part numbers
| Part no. | Diameter, in | Finish |
|---|---|---|
| MS20253-4-7200 | .179 | Passivated |
| MS20253-P4-7200 | .179 | Cadmium plated |
.1292 part numbers
| Part no. | Diameter, in | Finish |
|---|---|---|
| MS20253-5-7200 | .129 | Passivated |
| MS20253-P5-7200 | .129 | Cadmium plated |
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | MS20253-<dash> |
| Example | MS20253-1-7200 — .062 passivated |
Notes from the standard
- Cad plated is the P prefix (MS20253P heading). Diameters are in the order the catalogue prints them. To confirm: the separator and the order in the standard.
- Catalogue data: the standard governs. Use the part the drawing, SRM or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- MS20253 — Pin, Hinge, 6 ft — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.