Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H9040, Rev. C, 03/26/21 |
Part numbers
| Part no. | Size |
|---|---|
| H9040-4C | 1/8 in (-4) |
| H9040-5C | 5/32 in (-5) |
| H9040-6C | 3/16 in (-6) |
| H9040-8C | 1/4 in (-8) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| Cherry nut plate rivets (e.g. CCR264CS-4-04) and MS-9000 series (e.g. CR9163-5-05) | 4 (1/8), 5 (5/32), 6 (3/16), 8 (1/4) | H9040-4C, -5C, -6C, -8C; countersunk version installs both flush and universal head rivets |
Riveters
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 711A9 | SPRING, STEM STOP | 1 |
| 2 | H9040-4C: 712A10-1; H9040-5C: 712A10-1; H9040-6C: 712A10-2; H9040-8C: 712A10-3 | STEM STOP | 2 |
| 3 | H9040-4C: 712C2-4C; H9040-5C: 712C2-5C; H9040-6C: 712C2-6C; H9040-8C: 712C2-8C | SLEEVE | 1 |
| 4 | 680A25 | SPRING, RETAINER | 1 |
| 5 | 712B4 | COLLET | 1 |
| 6 | H9040-4C: P609; H9040-5C: P609; H9040-6C: P609; H9040-8C: 513-077 | JAW | 1 |
| 7 | 712A7 | JAW FOLLOWER | 1 |
| 8 | 712A8 | COMPRESSION SPRING | 1 |
| 9 | 712B5 | DRAWBOLT | 1 |
Notes from the maker
- Rivet dia to PH number: -4 (1/8) H9040-4C; -5 (5/32) H9040-5C; -6 (3/16) H9040-6C; -8 (1/4) H9040-8C
- Clean jaws and inside collet every 1,000 installations. Lubricate outside of jaws with Lubriplate or similar light grease.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H9040, Rev. C, 03/26/21 — Pulling Heads for Nut Plate Cherry Rivets (including 9000 series)
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.