MS20825 at a glance

Specification

Item	Value
Type	Fitting, tee, pipe thread on side
Status	Check the current issue of the standard before design use.

Dimension, in	-2	-3	-4	-5	-6	-8	-10	-12
T — Thread size (ref.)	5/16-24	3/8-24	7/16-20	1/2-20	9/16-18	3/4-16	7/8-14	1-1/16-12
OD — Tube O.D.	1/8	3/16	1/4	5/16	3/8	1/2	5/8	3/4
P — Pipe thread (ANPT)	1/8	1/8	1/8	1/8	1/4	3/8	1/2	3/4
Q — Q (+.047 / -.000)	.734	.797	.859	.922	1.031	1.219	1.422	1.652
S — S (+.047 / -.000)	.688	.688	.750	.750	1.062	1.188	1.438	1.562
V — V (+.016 / -.000)	.312	.375	.438	.500	.562	.750	.875	1.062

Dimensions in inches as tabulated in the catalogue listing; the standard governs. Blank cells: not stated in the listing.

Part no.	Size	Tube O.D.	Thread, in
MS20825-2	1/8	1/8	5/16-24
MS20825-3	3/16	3/16	3/8-24
MS20825-4	1/4	1/4	7/16-20
MS20825-5	5/16	5/16	1/2-20
MS20825-6	3/8	3/8	9/16-18
MS20825-8	1/2	1/2	3/4-16
MS20825-10	5/8	5/8	7/8-14
MS20825-12	3/4	3/4	1-1/16-12

Part numbers as listed. The standard governs and may list other sizes.

Part	Meaning
Format	MS20825-<dash><material>
D	Material: Aluminum
(none)	Material: Steel
J	Material: Corrosion resistant steel
Example	MS20825-4 — Steel, 1/4 in tube

Pipe threads 1/8 (-2 to -5) and S (.688 for -2/-3, .750 for -4/-5) are shared cells in the listing, repeated on each row.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

MS20825 — Tee, Pipe to Tube, Pipe Thread on Side — nominal sizes and part numbers.