DZUS-A35T at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Quarter-turn stud |
| Status | Manufacturer part. Check the manufacturer for any later revision before ordering. |
Part numbers
| Part no. | Total thickness T, in | Stud shank L, in | Stud shank B, in |
|---|---|---|---|
| A3.5T6 | .031-.060 | .290 | .170 |
| A3.5T9 | .061-.090 | .320 | .170 |
| A3.5T12 | .091-.102 | .350 | .210 |
| A3.5T15 | .121-.150 | .380 | .250 |
| A3.5T18 | .151-.180 | .410 | .290 |
| A3.5T21 | .181-.210 | .440 | .290 |
| A3.5T24 | .211-.240 | .470 | .330 |
| A3.5T27 | .241-.270 | .500 | .370 |
| A3.5T30 | .271-.300 | .530 | .410 |
| A3.5T33 | .301-.330 | .560 | .410 |
| A3.5T36 | .331-.360 | .590 | .450 |
Part numbers commonly stocked. The standard governs and may list others.
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | A3.5<dash> |
| Example | A3.5T12 — Total thickness as in its row |
Notes from the standard
- The stud number is the T number of the listing, written after the series (A3.5).
- The total thickness ranges are printed in the listing as shown, including .091-.102 followed by .121-.150.
- Alternate numbers in the listing: 2351-20-##-Z3CT (zinc trivalent chromate) and 2351-20-##-C3C (cadmium electroplated).
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- DZUS-A35T — Stud, Quarter-Turn, A3.5T Series (A35T, A3-1/2T) — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.