HLT900 at a glance

Specification

Item	Value
Type	Hi-Lok pin, 100° flush special shear head, titanium
Material	Titanium (6AL-4V per the catalogue quick-reference chart)
Strength	95,000 psi shear min.
Status	Check the current issue before design use.

Dimension, in	10-32-UNJF-3A Modified	1/4-28UNJF-3A Modified
Nominal diameter	3/16	1/4
A — Head diameter (max / min)	.3277	.4283
B — Ref. (see drawing)	.341	.416
D — Shank diameter (max / min)	.1895 – .1885	.2495 – .2485
TD — Threaded-end diameter (max / min)	.1840 – .1810	.2440 – .2410
H — H (max / min, see drawing)	.047 – .037	.055 – .045
Thread	10-32-UNJF-3A Modified	1/4-28UNJF-3A Modified
Double shear, lb min	5,380	9,300
Tension, lb min	2,400	4,500
A1 — See drawing	.2963	.3969
Z — Z, max	.015	.015

Dimensions as tabulated in the catalogue, by first dash number (nominal diameter). Max – min where a tolerance is shown.

Every part number, grouped by nominal diameter; the number after the second dash is the max grip in 1/16 in.

3/166 part numbers

1/46 part numbers

Part	Meaning
Format	HLT900AP<dash>
Example	HLT900AP6-3 — 3/16 nominal diameter, max grip 3/16 in

Titanium, 1/16 in grip variation. Hi-Kote 1 aluminum coating (AP) per Hi-Shear spec. 294 and cetyl alcohol lube per Hi-Shear spec. 305.
Approved data governs. Use the pin the drawing, SRM or IPC calls for.
Grip: the number after the second dash is the max grip in 1/16 in (dash -2 = 1/8 in, -3 = 3/16 in, and so on). Maximum-minimum values are shown as max – min.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

HLT900 — Hi-Lok Pin, 100° Flush Special Shear Head, Titanium, AP Hi-Kote 1 — nominal sizes and part numbers.