MS21922 at a glance

Specification

Item	Value
Type	Fitting, sleeve, flareless tube coupling
Status	Check the current issue of the standard before design use.

Dimension, in	-2	-3	-4	-5	-6	-8	-10	-12	-16
OD — Tube O.D.	1/8	3/16	1/4	5/16	3/8	1/2	5/8	3/4	1
A — A (+.01 / -.000)	.41	.45	.52	.59	.66	.75	.80	.75	.80
D — D (+.003 / -.000)	.164	.226	.294	.360	.419	.546	.682	.817	1.065
E — E (+.004 / -.000)	.129	.193	.255	.318	.380	.506	.633	.758	1.008
G — G	.175	.252	.309	.373	.435	.585	.707	.836	1.086
H — H	.256	.299	.359	.422	.484	.619	.750	.938	1.156

Dimensions in inches as tabulated in the catalogue listing; the standard governs. Blank cells: not stated in the listing.

Part numbers as listed. The standard governs and may list other sizes.

Part	Meaning
Format	MS21922-<dash><material>
(none)	Material: Steel
C	Material: Corrosion resistant steel
Example	MS21922-4 — Steel, 1/4 in tube

The catalogue prints the corrosion resistant dash as 2C ... 16C. Header tolerances (+.01; +.003 / -.000; +.004 / -.000) are printed over three columns and are shown on A, E and G; confirm in the standard.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.