The Aviation Point
The Aviation PointTechnical data sheet · theaviationpoint.com/parts/structural-bolts/ms20392/

MS20392 — headed clevis pin

Pin, Clevis, Headed: thread, grip, length and commonly stocked part numbers. Head and shank dimensions come from the standard itself.

View PDF

MS20392 at a glance

Where to buy
Photo to come
MS20392 engineering drawing with dimensions
Engineering drawing · dimensions in inches

Specification

ItemValue
TypeClevis pin
StatusCheck the current issue before design use.

Part numbers

Part numbers commonly stocked, with effective length.

1C26 part numbers

Part no.Effective length, in
MS20392-1C7.219
MS20392-1C9.281
MS20392-1C11.344
MS20392-1C13.406
MS20392-1C15.469
MS20392-1C17.531
MS20392-1C19.594
MS20392-1C21.656
MS20392-1C23.719
MS20392-1C25.781
MS20392-1C27.844
MS20392-1C29.906
MS20392-1C31.969
MS20392-1C331.031
MS20392-1C351.094
MS20392-1C371.156
MS20392-1C391.219
MS20392-1C411.281
MS20392-1C431.344
MS20392-1C451.406
MS20392-1C471.469
MS20392-1C491.531
MS20392-1C531.656
MS20392-1C551.719
MS20392-1C571.781
MS20392-1C631.969

2C26 part numbers

Part no.Effective length, in
MS20392-2C7.219
MS20392-2C9.281
MS20392-2C11.344
MS20392-2C13.406
MS20392-2C15.469
MS20392-2C17.531
MS20392-2C19.594
MS20392-2C21.656
MS20392-2C23.719
MS20392-2C25.781
MS20392-2C27.844
MS20392-2C29.906
MS20392-2C31.969
MS20392-2C331.031
MS20392-2C351.094
MS20392-2C371.156
MS20392-2C391.219
MS20392-2C411.281
MS20392-2C431.344
MS20392-2C451.406
MS20392-2C471.469
MS20392-2C491.531
MS20392-2C531.656
MS20392-2C551.719
MS20392-2C571.781
MS20392-2C631.969

3C24 part numbers

Part no.Effective length, in
MS20392-3C11.344
MS20392-3C13.406
MS20392-3C15.469
MS20392-3C17.531
MS20392-3C19.594
MS20392-3C21.656
MS20392-3C23.719
MS20392-3C25.781
MS20392-3C27.844
MS20392-3C29.906
MS20392-3C31.969
MS20392-3C331.031
MS20392-3C351.094
MS20392-3C371.156
MS20392-3C391.219
MS20392-3C411.281
MS20392-3C431.344
MS20392-3C451.406
MS20392-3C471.469
MS20392-3C491.531
MS20392-3C531.656
MS20392-3C551.719
MS20392-3C571.781
MS20392-3C631.969

Part number

What each code means

PartMeaning
FormatMS20392-<dash>
ExampleMS20392-1C7 — Clevis pin, effective length .219

Notes from the standard

  • Length is the effective length, in inches.
  • Part number format as commonly written; check the standard for the exact format.
  • Approved data governs. Use the bolt the SRM, drawing or IPC calls for.

Where to buy

AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Keep going

Calculators

CalculatorBolt Grip Length & Washer CalculatorCheck a bolt's grip length against the parts it holds and the washers needed to make it up…CalculatorAN Bolt Hole Drill SizeDrill for an AN bolt holeCalculatorTorque by Part Number: Bolt and NutTorque for an AN or NAS bolt with its nut, from AC 43.13-1B Table 7-1CalculatorPart number cross-referenceType any MS20392 number and see its other names.

Guides

ChartAN Bolt & Nut Torque ChartRecommended torque for AN and MS nuts and bolts in inch-pounds, fine and coarse thread, plus…ChartFastener cross-referenceFrequent fastener crosses with their supersession status

How to do it

Standard practiceTorquingHow to torque aircraft bolts

Data sheets

Data sheetAN bolts, AN3 to AN8AN3 to AN8 aircraft bolts side by sideData sheetStructural boltsThe family side by side.Data sheetMS20074Bolt, Drilled Head, Coarse ThreadData sheetMS21250Bolt, External Wrenching, Flanged, 12 Point, 180 ksi

Buy

Distributors coming soon.

Sources

  • MS20392 — Pin, Clevis, Headed — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close