Specification
Where to buy| Item | Value |
|---|---|
| Type | Right angle pulling head |
| Maker | Cherry Aerospace |
| Weight | 1.20 lb (0.54 kg) |
| Tool sheet | TS-H753A-456, Rev. E, 12/19/14 |
Part numbers
| Part no. | Size |
|---|---|
| H753A-456 | -4, -5, -6 |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| CherryMAX and CherryMAX AB | 4, 5, 6 | except 6 all aluminum |
| MAXIBOLT 'S' type | 4, 5 | |
| MBC Lock Creator | 4, 5, 6 | |
| CR1919 and CR1921 'U' type (NAS1900 with a shift washer) | 4, 5 |
Riveters
Reconfiguration: nosepiece, jaws and follower
| Fastener | Dia. | Nosepiece | Jaws | Jaw follower | Stem stop | Note |
|---|---|---|---|---|---|---|
| Washer type CR1919, CR1921 (NAS1900) | 4, 5, & 6 | 782-6AL | 782-010 | 886-002 | 886-007 | |
| CherryMAX 'AB', all aluminum | 6 | 782-6AL | 782-010 | 886-002 | 886-007 | |
| CR1919, CR1921 (NAS1900) - no washer | 4 | 782-4NAS | See parts list for jaw/follower/stem stop | |||
| CR1919, CR1921 (NAS1900) - no washer | 5 | 782-5NAS | See parts list for jaw/follower/stem stop | |||
| CR1919, CR1921 (NAS1900) - no washer | 6 | 782-6NAS | 782-010 | 886-002 | ||
| Standard MBC | 4 | 783-4MBC | 886-007 | |||
| Standard MBC | 5 | 782-5MBC | 886-007 | |||
| Standard MBC | 6 | 782-6MBC | 782-010 | 886-002 | 886-007 | |
| CherryLOCK 'A' | 3 | 886-003 | See parts list | |||
| CherryLOCK 'A' | 3 | 782-3E | Note 1: extended nosepiece for hard-to-reach holes (Fig 2, .168 / 5/32). See parts list | |||
| CherryLOCK 'A' | 4 | 886-004 | See parts list | |||
| CherryLOCK 'A' | 5 | 886-005 | 886-008 | See parts list for jaw/follower | ||
| CherryLOCK 'A' | 6 | 886-006 | 782-010 | 886-002 | 886-007 | |
| 3/32" SPR & nut plate rivets | 3 | 782-3 | See parts list | |||
| MAXIBOLT 'U' type | 5 | 782-5BB | See parts list |
Cherry's Table 1. Change these parts to install the other fasteners.
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 753C12-2 | Nose Piece (Table 1) | 1 |
| 2 | 753B12-1 | Sleeve | 1 |
| 3 | G6JN | Jam Nut | 1 |
| 4 | 753A13A | Collet | 1 |
| 5 | 701B18 | Jaws | 1 set |
| 6 | 753A14A | Jaw Follower | 1 |
| 7 | P293 | 0-ring | 1 |
| 8 | P-1003 | Spring | 1 |
| 9 | 753A15 | Stem Stop | 1 |
| Item | Part number | Description | Qty |
|---|---|---|---|
| 10 | P706 | 0-ring | 2 |
| 11 | 753C2-3 | Frame | 1 |
| 12 | 753A4 | Shoe Bearing | 2 |
| 13 | 753B3 | Collet Bolt | 1 |
| 14 | 753B5 | Lever | 1 |
| 15 | P-413 | Button Head Screw | 1 |
| 16 | P-930 | Set Screw | 2 |
| 17 | 753A16 | Guard | 1 |
| 18 | 753A10 | Pivot Pin | 2 |
| Item | Part number | Description | Qty |
|---|---|---|---|
| 19 | 753A9 | Link Pin | 4 |
| 20 | P954 | Link | 8 |
| 21 | 753B6 | Bell Crank | 1 |
| 22 | 753A11 | Guide Pin | 1 |
| 23 | 753A7 | Drawbolt | 1 |
| 24 | 753B8 | Adapter Fitting | 1 |
| 25 | 671A16 | Jam Nut | 1 |
Notes from the maker
- Note 1: This nose piece is extended for use in hard to reach holes; see Figure 2
- Note 2: Remove the component provided with the tool and replace with this one
- Mounting: attach riveter to air source; push collet bolt assembly forward; while holding it forward engage one to two drawbolt threads (item 23) onto riveter piston; engage adaptor and thread in all the way, orient as needed, lock with Jam Nut.
- May be configured to install a wide range of fasteners; suggested components purchased separately (Table 1).
- Clean and inspect nosepiece, jaws, collet & spring every 1000 installations or whenever a failure occurs; replace spring and jaws if worn. Lubricate outside of jaws with Lubriplate or similar light grease. Use Loctite 242 (removable) on all threaded components except as shown. Align jaws with jaw follower on reassembly (items 5 and 6).
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H753A-456, Rev. E, 12/19/14 — Universal Right Angle Pulling Head
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.