Specification
Where to buy| Item | Value |
|---|---|
| Type | Split pneumatic-hydraulic riveter |
| Maker | Cherry Aerospace |
| Air pressure | 90-110 psi (6.2-7.6 bar) |
| Stroke | 0.518 in (13.16 mm) |
| Pulling force | 3,136 lb (13.95 kN) at 90 psi |
| Item | Value |
|---|---|
| Cycle time | About 1 second |
| Hose length | 8 ft (2.44 m) |
| Weight | Power unit 4.5 lb (2.04 kg) |
| Noise level | Less than 85 dB(A) |
| Air consumption | 0.34 SCF/cycle (9.63 L/cycle) in TM-G704B-40SH; 4 CFM at 20 cycles/min in CA-1001 |
Part numbers
| Part no. | Size | Item |
|---|---|---|
| G704B-40SH | Riveter | Split riveter with 8-foot hose |
Cherry's part numbers for this tool, as the catalog lists them.
Pulling heads
| Pulling head | Type | Adapter | Rivet type | Diameters |
|---|---|---|---|---|
| H701B-456, H747-456 | Straight | — | CherryMAX, CherryMAX 'AB', MBC L/C, SST | -4, -5, -6 |
| H753A-456 | Right angle | — | CherryMAX, CherryMAX 'AB', SST | -4, -5, -6 |
| H781A-456, H782 | Offset | — | CherryMAX, CherryMAX 'AB', SST | -4, -5, -6 |
| H747-3A, -4A, -5A, -6A | Straight | — | CherryLOCK 'A' | -3, -4, -5, -6 |
| H9015-3C, -4C, -5C, -6C | Straight | 704A9 | MS and nutplate rivets | -3, -4, -5, -6 |
| H746-4MBC, -5MBC, -6MBC | Straight | — | Standard MBC | -4, -5, -6 |
| H704-()NP | Straight | — | Rivetless nutplate | — |
| H704-()NPC | Straight | — | Rivetless nutplates for composite structures | — |
Pulling heads are not furnished with the riveter. H747-456, H753A-456 and H782 can be re-configured to install -6 aluminum fasteners: see their tool sheets.
Riveter grip capability
| Fastener type | Grip |
|---|---|
| CherryMAX | All grips |
| CherryMAX 'AB' | -05 |
| CherryLOCK 'A' | -05 |
| Standard MBC and MBC L/C | 5 |
| SST | All grips |
| MS and nutplate rivets | -05 |
| MAXIBOLT, both types (U and S) | All grips |
| Rivetless nutplate | All grips |
Largest grip in one stroke. Grip capability may be extended by double stroking. MBC grip as identified by NAS1719, NAS1720 and NAS1721.
Notes from the maker
- Pulling heads are not furnished with the riveter and must be ordered separately.
- The main difference between the G704B-SR and the G704B-40SH is the length of the hose.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Fastening Systems for Aerospace Tool Catalog CA-1001, p. 4, 6 — Specifications, pulling heads and part numbers.
- Cherry Aerospace, Tool Manual TM-G704B-40SH, Rev. C, 1/28/15 — Specifications, operation, pulling heads and maintenance.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.