Specification
Where to buy| Item | Value |
|---|---|
| Type | Right angle pulling head |
| Maker | Cherry Aerospace |
| Weight | 2.1 lb (0.95 kg) |
| Tool sheet | TS-H829-56MBPS, 8-20-15 |
Part numbers
| Part no. | Size |
|---|---|
| H829-56MBPS | Pulling head |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| MAXIBOLT Plus, CherryMAX and EN BlindBolts | -5, -6 | -5 and -6 diameter |
| CherryMAX, CherryMAX AB (including all aluminum) and NAS1900 'U' type (shift washer type) | -6 | -6 diameter |
Riveters
Reconfiguration: nosepiece, jaws and follower
| Fastener | Dia. | Nosepiece | Jaws | Note |
|---|---|---|---|---|
| BlindBolt (MAXIBOLT) 'S' type -5 | -5 | 828B22 | 744C75 | components sold separately |
| BlindBolt (MAXIBOLT) 'U' type -5 | -5 | 828B24 | 744C75 | components sold separately |
| BlindBolt (MAXIBOLT) 'S' type -6 | -6 | 828B23 | 744C76 | components sold separately |
| BlindBolt (MAXIBOLT) 'U' type -6 | -6 | 828B25 | 744C76 | components sold separately |
Cherry's Table 1. Change these parts to install the other fasteners.
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 828-062 | Nosepiece | 1 |
| 2 | 828-060 | Sleeve | 1 |
| 3 | 828-061 | Collet | 1 |
| 4 | 652-043 | Jaws (set of 3) | 1 |
| 5 | 828-059 | Jaw Follower | 1 |
| 6 | P1381 | Compression Spring | 1 |
| 7 | 828-065 | Stem Stop | 1 |
| 8 | 828-058 | Drawbar | 1 |
| 9 | 828-056 | Lever | 1 |
| 10 | P930 | Set Screw | 2 |
| Item | Part number | Description | Qty |
|---|---|---|---|
| 11 | 828B15 | Link Plate | 2 |
| 12 | 828B14 | Link Pin | 4 |
| 13 | 828B4 | Bell Crank Link | 1 |
| 14 | 828-053 | Large Pivot Pin | 2 |
| 15 | 828-064 | Drawbolt | 1 |
| 16 | 828-063 | Frame Adapter | 1 |
| 17 | 642A64 | Jam Nut | 1 |
| 18 | 190-005 | Bayonet Swivel | 1 |
| 19 | 828-057 | Machined Frame | 1 |
Notes from the maker
- Table 1 (Nosepieces and Jaws): BlindBolt (MAXIBOLT) DIA -5: jaw set 744C75, nosepiece 'S' 828B22, 'U' 828B24; DIA -6: jaw set 744C76, nosepiece 'S' 828B23, 'U' 828B25.
- As supplied (items 1 nosepiece 828-062, jaws 652-043) installs MAXIBOLT Plus/CherryMAX/EN BlindBolts -5,-6 etc.
- Mount: engage drawbolt (15) with riveter piston and thread in all the way; push head to riveter bayonet and rotate; jam nut locks position.
- Remove broken stems by hand after each installation.
- Inspect active area regularly; clean insert, jaws and jaw cavity inside collet every 1,000 installations; lubricate jaws and other internal moving components with Lubriplate or similar light grease; assemble jam nut (17) BEFORE bayonet swivel (18) (swivel stays trapped, damaged on removal); Loctite 242 (removable) on all threaded components and on the bayonet swivel.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H829-56MBPS, 8-20-15 — Compact Right Angle Pulling Head for CherryMAX and MAXIBOLT Plus Fasteners
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.