9505 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Blind rivet nut (rivnut), internally threaded |
| Material | Carbon steel, cadmium plate |
| Status | Listing data: sizes and part numbers commonly stocked. The standard or manufacturer drawing governs; check its current issue before design use. |
Dimensions by size
| Dimension, in | 4-40 | 6-32 | 8-32 | 10-24 |
|---|---|---|---|---|
| A — A, min | .182 | .214 | .245 | .276 |
| L — L (tolerance ± .05 as printed) | .185 | .185 | .185 | .185 |
| M — M, max | .385 | .385 | .385 | .385 |
| C1 — C, recommended min. hole size, G .03 to .09 | .1875 | .2187 | .2500 | .2812 |
| C2 — C, recommended min. hole size, G .091 to .124 | .1935 | .2210 | .2570 | .2900 |
| C3 — C, recommended min. hole size, G .125 to .186 | .1935 | .2280 | .2656 | .2968 |
| C4 — C, recommended min. hole size, G .187 and over | .1935 | .2280 | .2656 | .2968 |
A, L, M and the recommended hole size C as listed; G is the thickness of the material.
Part numbers
The four stocked thread sizes.
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | 9505-<dash> |
| Example | 9505-06 — 6-32 thread |
Notes from the standard
- G is the material thickness (grip) the nutsert is set in; C is the recommended minimum drilled hole size for that thickness.
- The listing prints the tolerance on L as '± .05'; confirm against the manufacturer drawing.
- Approved data governs. Use the fastener the SRM, drawing or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- 9505 — Nutsert 9505 series, splined body, carbon steel, cadmium plate — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.