MS90354 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Blind rivet, high strength |
| Material | High strength alloy steel, 112 ksi (as listed) |
| Status | Listing data: sizes and part numbers commonly stocked. The standard or manufacturer drawing governs; check its current issue before design use. |
Dimensions by size
| Dimension, in | 5/32 | 3/16 |
|---|---|---|
| D — Nominal size | 5/32 | 3/16 |
Nominal diameters as listed. Dimensions not given there are not stated here; take them from the standard.
Part numbers
Grip ranges and part numbers commonly stocked. The standard governs and may list others.
5/327 part numbers
| Part no. | Grip min, in | Grip max, in | Single action | Single action, U |
|---|---|---|---|---|
| MS90354-0502 | .094 | .157 | MS90354S0502 | MS90354U0502 |
| MS90354-0503 | .156 | .220 | MS90354S0503 | MS90354U0503 |
| MS90354-0504 | .219 | .282 | MS90354S0504 | MS90354U0504 |
| MS90354-0505 | .281 | .345 | MS90354S0505 | MS90354U0505 |
| MS90354-0506 | .344 | .407 | MS90354S0506 | MS90354U0506 |
| MS90354-0507 | .406 | .470 | MS90354S0507 | MS90354U0507 |
| MS90354-0508 | .469 | .523 | MS90354S0508 | MS90354U0508 |
3/167 part numbers
| Part no. | Grip min, in | Grip max, in | Single action | Single action, U |
|---|---|---|---|---|
| MS90354-0602 | .094 | .157 | MS90354S0602 | MS90354U0602 |
| MS90354-0603 | .156 | .220 | MS90354S0603 | MS90354U0603 |
| MS90354-0604 | .219 | .282 | MS90354S0604 | MS90354U0604 |
| MS90354-0605 | .281 | .345 | MS90354S0605 | MS90354U0605 |
| MS90354-0606 | .344 | .407 | MS90354S0606 | MS90354U0606 |
| MS90354-0607 | .406 | .470 | MS90354S0607 | MS90354U0607 |
| MS90354-0608 | .469 | .523 | MS90354S0608 | MS90354U0608 |
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | MS90354<action><dash> |
| - | Action: Double action tool |
| S | Action: Single action tool |
| U | Action: Single action fastener, single action tool |
| Example | MS90354-0504 — 5/32 in, double action tool, grip dash 04 (grip .219-.282 in) |
Notes from the standard
- First two digits of the dash: diameter (05 = 5/32, 06 = 3/16); the last two: grip.
- A hyphen after the basic number: installation with a double action tool. S: fastener installed with a single action tool. U: single action fastener installed with a single action tool.
- Material and strength are as the listing prints them; the standard governs.
- Approved data governs. Use the fastener the SRM, drawing or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- MS90354 — Blind rivet, protruding head, high strength, alloy steel 112 ksi — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.