HLT912 at a glance

Specification

Item	Value
Type	Hi-Lok pin, protruding tension head, titanium
Material	Titanium
Strength	95,000 psi shear min.; 160,000 psi tensile min.
Status	Check the current issue before design use.

Dimension, in	8-32UNJC-3A Modified	10-32-UNJF-3A Modified
Nominal diameter	5/32	3/16
A — Head diameter (max / min)	.322 – .306	.377 – .357
B — Ref. (see drawing)	.328	.341
D — Shank diameter (max / min)	.1635 – .1625	.1895 – .1885
TD — Threaded-end diameter (max / min)	.1595 – .1570	.1840 – .1810
G — G, ref.	.030	.035
H — H (max / min, see drawing)	.065 – .055	.074 – .064
Thread	8-32UNJC-3A Modified	10-32-UNJF-3A Modified
Double shear, lb min	4,010	5,380
Tension, lb min	2,180	3,180

Dimensions as tabulated in the catalogue, by first dash number (nominal diameter). Max – min where a tolerance is shown.

Every part number, grouped by nominal diameter; the number after the second dash is the max grip in 1/16 in.

5/326 part numbers

3/166 part numbers

Part	Meaning
Format	HLT912AP<dash>
Example	HLT912AP5-3 — 5/32 nominal diameter, max grip 3/16 in

Titanium, 1/16 in grip variation. Hi-Kote 1 aluminum coating (AP) per Hi-Shear spec. 294 and cetyl alcohol lube per Hi-Shear spec. 305.
Approved data governs. Use the pin the drawing, SRM or IPC calls for.
Grip: the number after the second dash is the max grip in 1/16 in (dash -2 = 1/8 in, -3 = 3/16 in, and so on). Maximum-minimum values are shown as max – min.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

HLT912 — Hi-Lok Pin, Protruding Tension Head, Titanium, AP Hi-Kote 1 — nominal sizes and part numbers.