Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H702-3NPR, Rev. A, 02/05/07 |
Part numbers
| Part no. | Size |
|---|---|
| H702-3NPR | 3/32 in (-3) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
Riveters
| Riveter | Adapter | Note |
|---|---|---|
| G702 | — | fits directly |
| G702A | — | fits directly |
Parts list
Notes from the maker
- Mounting: connect tool to air supply; place jaws (5) inside collet (4); insert jaw follower (6) with spring (7) into collet; screw onto head piston ensuring tapered end of jaw follower aligned in bevel in back end of jaws; thread nosepiece (1) fully into sleeve (2) and place over collet/jaw assembly; thread onto riveter while depressing trigger, tighten snugly; tighten jam-nut (3).
- Keep head clean and dry, parts securely tightened; lubricate inside cone of collet with Lubriplate for jaw alignment; replace worn components.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H702-3NPR, Rev. A, 02/05/07 — Cherry Nut-Plate Rivet Pulling Head
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.