The Aviation Point
The Aviation PointTechnical data sheet · theaviationpoint.com/parts/blind-fasteners/cr3524/

CR3524 — Cherrymax, 100° flush shear head, CRES stem, Monel

Cherrymax blind rivet, 100° flush shear head, corrosion resistant stem, Monel sleeve: nominal sizes, grip ranges and commonly stocked part numbers. Detailed dimensions come from the standard itself.

View PDF

CR3524 at a glance

Where to buy
CR3524, cherrymax blind rivet, 100° flush shear head, corrosion resistant stem, monel sleeve
CR3524
CR3524 engineering drawing with dimensions
Engineering drawing · dimensions in inches

Specification

ItemValue
TypeBlind rivet, bulbed, structural
MaterialCorrosion resistant stem; Monel sleeve
StatusListing data: sizes and part numbers commonly stocked. The standard or manufacturer drawing governs; check its current issue before design use.

Dimensions by size

Dimension, in1/85/323/16
D — Nominal diameter, as printed1/85/323/16

Nominal diameters as listed. Dimensions not given there are not stated here; take them from the standard.

Part numbers

Grip ranges and part numbers commonly stocked. The standard governs and may list others.

1/85 part numbers

Part no.Grip min, inGrip max, in
CR3524-4-02.063.125
CR3524-4-03.126.187
CR3524-4-04.188.250
CR3524-4-05.251.312
CR3524-4-06.313.375

5/325 part numbers

Part no.Grip min, inGrip max, in
CR3524-5-02.065.125
CR3524-5-03.126.187
CR3524-5-04.188.250
CR3524-5-05.251.312
CR3524-5-06.313.375

3/165 part numbers

Part no.Grip min, inGrip max, in
CR3524-6-02.080.125
CR3524-6-03.126.187
CR3524-6-04.188.250
CR3524-6-05.251.312
CR3524-6-06.313.375

Part number

What each code means

PartMeaning
FormatCR3524-<dash>
ExampleCR3524-4-06 — diameter dash 4 (1/8), grip dash 06 (grip range .313-.375 in)

Notes from the standard

  • Part number: basic number, diameter dash, grip dash (the first digit is the diameter, the two digits after the hyphen the grip).
  • Part numbers and grip ranges are as listed in commercial listing data; combinations shown as blank or '---' there are not listed here.
  • Approved data governs. Use the fastener the SRM, drawing or IPC calls for.

Where to buy

AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Keep going

Calculators

CalculatorCherryMAX Grip SelectorPick the CherryMAX grip number for a measured stackCalculatorCherry Pulling Head SelectorWhich Cherry pulling head installs your blind rivet on your riveter, straight, right angle or…CalculatorPart number cross-referenceType any CR3524 number and see its other names.CalculatorWhat Drill or Reamer for This Part Number?Type a rivet, CherryMAX, CherryLOCK or Hi-Lok number

Guides

GuideBlind fastenersWhen a blind rivet may replace a solid rivet in an aircraft repair, where it is prohibited…ChartHi-Lok and CherryMAX gripGrip number against stack thickness for Hi-Lok pins and CherryMAX rivets in inches and…ChartFastener cross-referenceFrequent fastener crosses with their supersession status

How to do it

Standard practiceBlind rivetsHow to install a CherryMAX blind rivet

Tools

Buying guideCherry pulling heads and riveters: every tool sheet and manualEvery Cherry pulling head with what it installs as supplied, the riveters it fits and its…

Data sheets

Data sheetBlind fastenersThe family side by side.Data sheetCR3523Cherrymax blind rivet, universal head, corrosion resistant stem, Monel rivetData sheetCR3552Cherrymax blind rivet, 100° flush head, corrosion resistant stem, Monel rivet, oversize

Buy

Distributors coming soon.

Sources

  • CR3524 — Cherrymax blind rivet, 100° flush shear head, corrosion resistant stem, Monel sleeve — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close